Are all Subaru wheel nuts the same?
The short answer is no, not all Subaru wheel nuts are the same. Subaru uses different wheel nut sizes and torque specifications depending on the model and year of the vehicle. It's important to consult your owner's manual or contact a Subaru dealer to determine the correct wheel nut size and torque for your specific Subaru model.
Wheel Nut Variations Across Subaru Models
Subaru vehicles use a variety of wheel nut sizes, ranging from 12mm to 14mm in diameter. The specific size used can vary based on factors such as the vehicle's year, model, and trim level. For example, older Subaru models like the Impreza and Legacy may have 12mm wheel nuts, while newer models like the Ascent and Outback may use 14mm wheel nuts.
In addition to the nut size, Subaru also specifies different torque values for the wheel nuts, typically ranging from 70 to 100 ft-lbs of torque. Proper torque is crucial to ensure the wheels are securely attached and to prevent potential safety issues.
Importance of Using the Correct Wheel Nuts
- Safety: Using the wrong size or improperly torqued wheel nuts can lead to the wheels becoming loose or even detaching, which poses a serious safety risk.
- Warranty: Using the incorrect wheel nuts may void the vehicle's warranty, as it could be considered a modification or improper maintenance.
- Damage Prevention: Overtightening or undertightening the wheel nuts can cause damage to the wheel, hub, or other components, leading to costly repairs.
To ensure the safety and longevity of your Subaru, it's essential to use the correct wheel nuts and torque them to the manufacturer's specifications. Consult your owner's manual or contact a Subaru dealer for the specific details on your vehicle.
Are Subaru lug nuts metric or standard?
Yes, almost all Subaru cars use metric bolts. The thread sizes of the lug nuts will vary based on the wheel studs. Therefore, you need metric Subaru lug nuts to fully secure the wheels. For example, the most common metric thread sizes of Subaru bolts are M12x1.
What Subaru has a 5x114.3 bolt pattern?
3 bolt pattern. The 5x114. 3 bolt pattern also works on Subaru's CUV/SUVs such as the Forester, Outback and Ascent.
How do I know my wheel nut size?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
What size are Subaru wheel nuts?
The lug nut size on most Subarus is 12mm x 1.25. This includes models like the Impreza, Legacy, Outback, Forester, Crosstrek, and newer WRX/STi models.
Do all subarus have the same lug nut pattern?
Each Subaru has a specific way in which its wheels attach to the car. It's like a fingerprint – unique and important.
Are all Subaru wheel bearings the same?
Subaru features two different types of wheel bearings, and your model might have one or the other, depending on how old it is. The first type is simple in its construction, and it is common for most Subaru cars that were built before the year of 2006 and after 1991.
Are all Subaru lug nuts the same?
No, not all Subaru lug nuts are the same. There are various wheel nuts for Subaru in the market. Most Subaru vehicles use steel wheel nuts. The most common thread sizes that are used by Subaru cars are M12x1.
What stud pattern are Subaru?
A good rule of thumb is, for anything older than 2018, your bolt pattern is typically 5x100. Newer than 2018, it's a 5x114. 3 bolt pattern. Both 5x100 and 5x114.
Who makes Subaru wheel bearing hubs?
NTN
NTN is the OEM for subaru bearings. They are a lot cheaper, and if you don't have rust, can change in your driveway in about an hour with hand tools.
Are all lug nuts interchangeable?
No. Lug nut sizes depend on the car's manufacturer, & depends on whether that manufacturer uses ASE standard nuts or metric nuts. Common ASE standard nuts are 7/16, 1/2, 9/16, & 5/8 inches.
