Are Honda bolts sae or metric?
Honda vehicles typically use metric fasteners, including bolts, nuts, and screws. The majority of Honda's hardware is designed to metric specifications rather than the SAE (Society of Automotive Engineers) standard used in many American-made vehicles.
Metric Fasteners in Honda Vehicles
Honda has long favored the use of metric fasteners in its vehicles, both for domestic and international markets. This design choice aligns with the widespread adoption of the metric system in most parts of the world outside of the United States. Metric fasteners are the industry standard for most global automakers, providing advantages in terms of interchangeability and standardization of parts.
The use of metric hardware in Honda vehicles extends beyond just the body and chassis. Even components like the engine, transmission, and suspension typically feature metric bolts and nuts. This consistency helps simplify maintenance and repair procedures for Honda owners and technicians.
Exceptions and Variations
While the majority of Honda's fasteners are metric, there may be some exceptions or variations depending on the specific model and year. Older Honda vehicles, particularly those sold in North America, may have used a mix of metric and SAE hardware. Additionally, some specialty or high-performance Honda models may incorporate SAE fasteners in certain areas for compatibility with aftermarket parts.
It's always best to consult your vehicle's service manual or work with a qualified Honda technician to ensure you are using the correct fasteners when performing maintenance or repairs.
How do I know if a bolt is sae or metric?
And this one says 10.9. Those are different grades of metric bolts. Pick up this large one here you can see that one says 12.9. So anytime you see 8.8 10.9 and 12.9 those are metric graded bolts.
Does Honda use SAE or metric?
Honda vehicles use metric fasteners, including most bolt sizes like the common M12x1.5, and their tools, such as socket sizes like 19mm, are based on millimeters. While some power output figures may be reported using SAE net standards, the physical hardware on the vehicle itself is metric.
- Metric is standard: Honda's design and engineering are primarily based on the metric system, so virtually all bolts, nuts, and other fasteners will be metric-sized.
- Common sizes: You will most frequently encounter metric sizes like 12x1.5mm for smaller cars (Civic, Accord) and 14x1.5mm for larger models (Pilot, Odyssey, Ridgeline).
- Tool requirements: This means you will need a set of metric sockets and wrenches, not SAE (inch-based) ones, to work on a Honda. For example, an M12x1.5 bolt will require a 19mm socket.
- JIS screws: Some older models and specific screws may use Japanese Industrial Standard (JIS) metric sizes, which can have slightly different dimensions than ISO metric sizes and require the correct JIS screwdrivers for proper fit and to avoid damage.
Are car bolts sae or metric?
SAE Bolt Grades: The standards for bolt strength grades in the U.S. They are set according to a system developed by the SAE. SAE stands for Society of Automotive Engineers. The SAE marking system uses raised dashes on the bolt head. The dashes are used to indicate strength.
What type of bolts do Hondas use?
Yes, almost all Honda bolts are metric. For example, the most common metric thread sizes of Honda bolts are M12x1. 5mm and M14x1. 5mm.
