Loading

Are there grease fittings on a Honda Rancher?

Yes, Honda Rancher ATVs typically have grease fittings that require regular maintenance. Grease fittings are small, threaded fittings that allow you to apply fresh grease to the moving parts of the vehicle, helping to keep them lubricated and in good working condition.


What are Grease Fittings?


Grease fittings, also known as Zerk fittings, are small, threaded connectors that allow you to pump fresh grease into the moving parts of a vehicle or piece of equipment. They are commonly found on things like wheel bearings, suspension components, and other joints that need regular lubrication to prevent wear and tear.


Do Honda Ranchers Have Grease Fittings?


Yes, Honda Rancher ATVs typically have several grease fittings that need to be serviced on a regular basis. The specific number and location of the grease fittings can vary depending on the model year and exact Rancher configuration, but common areas include:



  • Front wheel bearings

  • Rear wheel bearings

  • Steering knuckles

  • Swing arm pivot points

  • Rear differential


Regularly greasing these fittings helps ensure the moving parts of the Rancher remain well-lubricated and operate smoothly. Neglecting this maintenance can lead to premature wear and potential failure of these critical components.


How to Grease a Honda Rancher


Greasing the fittings on a Honda Rancher is a relatively straightforward process, but does require some basic tools and supplies:



  • Grease gun

  • Appropriate grease (check your owner's manual for the recommended type)

  • Clean rags


The general steps are:
1. Locate the grease fittings on your Rancher
2. Wipe the fittings clean with a rag to remove any dirt or debris
3. Attach the grease gun to the fitting and pump in fresh grease until you see it start to come out around the edges
4. Repeat this process for each grease fitting on the vehicle
Be sure to consult your Honda Rancher owner's manual for the recommended grease type and service intervals to keep your ATV in top shape.

Are there any grease fittings?


The most common standard grease fitting size is 1/4"‑28 SAE‑LT and is often used in automotive applications. "SAE-LT" refers to a special thread that applies a taper to standard UNF threads. They can also be found in agricultural environments as well as other various standard duty applications.



Do trucks have grease fittings?


These small metal fittings are usually located on moving parts of trucks, machinery gears, clutches, and other critical components. A good place to start is to check your equipment's user manual which should list all the grease points.



Where are grease fittings located?


According to FULLBAY who focuses on heavy duty equipment, these are the main places grease zerk fittings are found: wheel ends. Hinge or pivot joints (hoods, covers, 5th wheel mounts) 5th wheel plate and lock.



Do ATVs have grease fittings?


Modern ATVs come with a part called Zerk Fittings, also called grease or nipple fittings. This is where you attach the grease gun to squeeze grease into the wheel bearings.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.