Loading

Can you fit a 4x8 sheet of plywood in a Ford Explorer?

Yes, it is possible to fit a 4x8 sheet of plywood in a Ford Explorer, but it may require some careful maneuvering and planning. The Ford Explorer has a decent amount of cargo space, but the dimensions of a 4x8 sheet of plywood can present a challenge.


Cargo Space in the Ford Explorer


The Ford Explorer has a maximum cargo volume of 87.8 cubic feet with the rear seats folded down. This provides ample space for transporting large items, but the dimensions of the cargo area are important to consider. The Ford Explorer has a maximum cargo length of 85.5 inches (7.13 feet) with the rear seats folded down.


Fitting a 4x8 Sheet of Plywood


A standard 4x8 sheet of plywood measures 48 inches (4 feet) by 96 inches (8 feet). This means that the length of the plywood sheet is longer than the maximum cargo length of the Ford Explorer. However, with some creative maneuvering, it is possible to fit the plywood in the vehicle.



  • Fold down the rear seats to maximize the cargo space.

  • Position the plywood sheet diagonally in the cargo area, with one corner resting on the floor and the opposite corner extending into the passenger area.

  • If necessary, remove the front passenger seat to allow the plywood sheet to extend further into the vehicle.

  • Secure the plywood sheet using tie-down straps or ropes to prevent it from shifting during transport.


It's important to note that while a 4x8 sheet of plywood can fit in a Ford Explorer, the vehicle may not be able to accommodate the full length of the sheet. Depending on the specific dimensions of your Ford Explorer and the plywood, you may need to consider alternative transportation options or have the plywood cut to a smaller size.

How big is a Ford Explorer trunk with seats down?


Boasting impressive versatility, the Ford Explorer's cargo area adapts to your needs with ease. Behind the back seats, you get 18.2 cubic feet of cargo room. Flip down the last row, and you've got 47.9 cubic feet for more sizable loads. Fold down all rear rows, and you've got a whopping 87.8 cubic feet.



How do you transport plywood on a car roof?


Put the plywood on top. Secure the plywood by tieing it down to the luggage rack underneath. Ratchet it tight to prevent any movement while driving. Be sure to strap it down in such a way where the wind won't be able to lift it up.



Will 4x8 plywood fit in a Ford Explorer?


Fold-Flat Seats
Plenty of big SUVs have seats that fold “flat”, but not many will give you the near-perfect flat load floor offered by the 2021 Ford Explorer. Whether fitted with second-row Captain's Chairs or bench, the Explorer will swallow up a 4×8 sheet of plywood.



Will a 4x8 sheet of plywood fit in a Ford Expedition?


Ford Expedition MAX
Nearly a foot longer than the traditional Expedition, it has roughly 17 more cubic feet of cargo space. In fact, it can even carry 4x8-foot sheets of plywood with the liftgate closed.



How wide is the inside of a Ford Explorer?


Ford Explorer Shoulder Room (Front/Middle/Rear): 62.1 inches / 61.9 inches / 54.6 inches. Ford Explorer Hip Room (Front/Middle/Rear): 59.2 inches / 59.1 inches / 40.9 inches. Ford Explorer Legroom (Front/Middle/Rear): 43 inches / 39 inches / 32.2 inches.



Can I put a sheet over my car?


If you purchase a car cover the good ones allow moisture to escape. This way you don't have moisture sitting on top of the vehicle. If you use a tarp, it will trap condensation underneath it, so you will have a vehicle that's constantly wet. Eventually you will get rust.



What minivans can carry a 4x8 sheet of plywood?


You can still fit a 4x8 sheet of plywood or drywall inside a Pacifica or Grand Caravan. The Kia Sedona minivan has 2,220 litres of cargo space behind its second row and is 23 centimetres shorter than Ford's less fuel-efficient Expedition, which has just 1,628 litres of cargo space.



Can a sheet of plywood fit in an SUV?


Seriously, even contractors will often have plywood delivered to job sites now rather than load and unload it themselves. So, most SUVs aren't designed to carry a flat sheet of plywood. Only the biggest, full-sized rigs based on pickup trucks will do that, along with some minivans with two rows of seats removed.



How do you transport wood in an SUV?


I've transported lumber as long as 12-feet long inside of my compact SUV by laying the lumber diagonally so that one end is in the corner of the trunk area behind the driver's seat, and the other end runs through the space between the front seats and ends in the foot well of the passenger seat.



Do the seats fold down in a Ford Explorer?


So very straightforward.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.