Loading

Can you put a turbo on a Ford Fiesta ST?

Yes, it is possible to install a turbocharger on a Ford Fiesta ST. While the Fiesta ST comes equipped with a powerful 1.6-liter EcoBoost engine, adding a turbocharger can significantly boost its performance and power output.


Understanding the Ford Fiesta ST


The Ford Fiesta ST is a high-performance variant of the popular Fiesta subcompact car. It features a turbocharged 1.6-liter EcoBoost engine that produces 197 horsepower and 202 lb-ft of torque. This engine is already quite powerful, but some enthusiasts seek even more power and responsiveness from their Fiesta ST.


Turbocharging the Fiesta ST


Turbocharging the Fiesta ST is a popular modification among owners who want to extract more power from their vehicle. By adding a turbocharger, the engine's power output can be increased significantly, often resulting in an additional 50-100 horsepower or more.


The process of turbocharging a Fiesta ST typically involves the following steps:



  • Selecting a suitable turbocharger kit that is compatible with the Fiesta ST's engine and chassis

  • Modifying the engine's fuel system to support the increased airflow and power

  • Upgrading other components, such as the intercooler, exhaust system, and engine management system, to handle the additional power

  • Ensuring the turbocharger is properly installed and tuned to optimize performance and reliability


It's important to note that turbocharging a Fiesta ST requires careful planning, installation, and tuning to ensure the engine and other components can handle the increased power safely and reliably. Consulting with a reputable performance shop or experienced tuner is highly recommended.


Considerations and Potential Drawbacks


While turbocharging a Fiesta ST can provide a significant boost in power, there are some potential drawbacks and considerations to keep in mind:



  • Increased fuel consumption and reduced fuel efficiency due to the higher power output

  • Potential for increased maintenance and wear on engine components, requiring more frequent servicing

  • Potential for reduced reliability if the turbocharger and supporting modifications are not properly installed and tuned

  • Potential for increased noise and vibration levels, which may not be desirable for all owners

  • Potential for legal and insurance implications, depending on local regulations and the owner's insurance policy


Ultimately, the decision to turbocharge a Fiesta ST should be carefully considered, taking into account the owner's driving needs, budget, and willingness to accept the potential drawbacks.

How much horsepower does a Stage 3 Ford Fiesta ST have?


Stage 3 Fiesta ST VT330r Package:

Stock FiguresStage 3 Package
Power Figures182 BHP330 BHP
Torque Figures177 ft/lb315 ft/lb



Can I put a turbo in my non turbo car?


yes. a turbo can be fitted to a non turbo engine. but you can only run low boost as the n/a motor is setup for high compression and will cause detonation with high boost and high compression. The fpr (fuel pressure regulator) may need to be changed.



Can you supercharge a Fiesta ST?


With this kit fitted we have seen power at 320bhp with a stock bottom end. We would advise the use of a Cosworth inlet manifold to take full advantage of the power available from the Stage 2.5 kit.



Does a Fiesta ST have a turbo?


The Ford Fiesta ST wasn't just the best car in its class when new, it also ranks among the very best small hot hatches of all time in our book. Combining the Mk7 Fiesta's sparkling chassis with a lively, brawny turbocharged ecoboost engine and slick manual gearshift.



Can you tune a Fiesta ST?


The VUDU Performance Stage 1 remap software is our introductory tuning software for the Fiesta ST Mk7. It's perfect for those Fiesta owners looking to dip their feet in the tuning world with a noticeable increase in power and torque without the need for any additional hardware.



What happens if you put a turbo on a stock engine?


After implementing the upgrades, your engine will probably produce more horsepower. However, this enhanced performance comes with a cost – a faster rate of engine wear and tear. The turbocharged experience has its trade-offs, which require a balance between power and longevity.



How much does it cost to add a turbo?


The typical cost of installing a turbocharger in a car is approximately $3,000 to $5,000. However, it's essential to note that this estimate is subjective and can vary based on individual circumstances.



How much horsepower can you get out of a Fiesta ST?


So plan on about 240-250 HP maximum. If you want more than that then spend the money to get a Mountune short block with forged internals.



Is a Focus ST or Fiesta ST faster?


Out of the two, the Ford Focus is the faster of the pair, even though it is larger than the Fiesta ST, with a top speed of 154mph, 17mph faster than the Fiesta, and 247bhp. It reaches 0-60mph 0.4 seconds faster than the Fiesta ST, at only 6.5 seconds.



Is Ford Fiesta ST fast?


The new model gets from 0-60mph more quickly than the old model (just 6.5 seconds) and its accompanying pops and bangs from the exhaust confirm the Fiesta as one of the most joyous ways you can spend around £20K.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.