Do Nissan and Toyota have the same lug pattern?
Not universally. While there is overlap—particularly the widely used 5x114.3 bolt pattern—each brand has models that use other patterns, and center bore and offset differences can affect fitment. Always verify the exact specifications for your specific model and year before buying wheels or adapters.
Understanding lug patterns and where overlaps occur
A lug pattern describes how many bolts the wheel uses and the diameter of the bolt circle (the Pitch Circle Diameter, or PCD). For 5-lug wheels, a common pattern is 5x114.3 mm (five bolts on a 114.3 mm circle). Both Nissan and Toyota use several different patterns across their lineups, so an exact match depends on the model and year. The most frequent cross-brand overlap today is 5x114.3, but there are notable exceptions.
Common patterns by brand (not exhaustive):
- Nissan: 5x114.3 mm on the majority of contemporary models; 4x100 mm is found on some older or specialty models.
- Toyota: 5x114.3 mm on many mid- to large-models (Camry, RAV4, Highlander, etc.); 4x100 mm is present on certain older or smaller models.
Note: Always verify the exact bolt pattern for your specific model/year using the owner's manual, a VIN-based parts database, or precise measurement. Mismatches can prevent proper mounting or cause safety risks even if the wheel appears to fit.
Key compatibility checks when considering cross-brand wheels
Before attempting to swap wheels between Nissan and Toyota, perform several checks to avoid interference or unsafe mounting:
- Pattern match: Confirm the PCD exactly (for example, 5x114.3 vs another pattern). If the pattern differs, wheels will not bolt on without adapters, which carry safety and warranty considerations.
- Center bore: Toyota wheels typically have a center bore around 60.1 mm; Nissan wheels commonly have around 66.1 mm. If the wheel’s bore is larger, hub-centric rings are needed to center the wheel properly on the hub and reduce runout.
- Offset and width: Ensure the wheel offset (and width) won’t cause rubbing with fenders, suspension, or brake calipers. Offsets outside the vehicle’s designed range can affect steering and clearance.
- Brake clearance and lug nut type: Verify that the wheel clears brake calipers and uses compatible lug nuts and thread pitch. Some aftermarket wheels may require different lug nuts or stud lengths.
Conclusion: While there is overlap in patterns like 5x114.3, it is not guaranteed that Nissan and Toyota wheels will fit across all models. Always confirm pattern, bore, offset, and clearance for your exact vehicle configuration, or consult a professional installer.
Summary
Across Nissan and Toyota, there is no universal lug pattern that works on every model. The most common cross-brand overlap today is 5x114.3, but many vehicles from either brand use other patterns. Always verify the precise bolt pattern, center bore, and offset for your vehicle’s year and trim, and when in doubt, seek expert advice or use a trusted wheel-fitment resource.
What's the lug pattern for a Nissan?
Finance your Nissan Wheels
| YEAR | MAKE | COMMENTS |
|---|---|---|
| 2013 | Nissan | 5 lug 4.5 inch or 114.3mm High Positive Offset |
| 2014 | Nissan | 5 lug 4.5 inch or 114.3mm High Positive Offset |
| 1993 | Nissan | 4 lug 4.5 inch or 114.3mm High Positive Offset |
| 1994 | Nissan | 4 lug 4.5 inch or 114.3mm High Positive Offset |
What lug pattern does Toyota use?
Bolt Pattern Knowledge
For instance, many Toyota sedans and SUVs use a 5 x 114.3 mm bolt pattern, a standard size that opens up a wide range of interchangeable options. A bolt pattern, or lug pattern, refers to the configuration of the lug holes on a wheel.
Do Toyota and Nissan have the same bolt pattern?
The bolt pattern is the same, but the center hole is bigger. Not sure if that messes any thing up.
What cars will a 5x100 bolt pattern fit Toyota?
Here's a look at some of the most common ones:
- Subaru: Many models, including the Subaru Impreza (non-STI versions), Legacy, and Forester, use the 5x100 bolt pattern.
- Toyota: The Toyota Celica, specific Corolla models, and the Scion tC are also known to use 5x100 wheels.
