Does a 2013 Chevy Malibu have a transmission filter?
Yes. The 2013 Malibu’s automatic transmission includes a filtration system (a filter/screen) that is serviced when you drop the pan. It is not a simple external spin-on filter you can swap without accessing the pan area.
What transmission does the Malibu use and why the filter matters
Most 2013 Malibu models use GM’s 6-speed automatic transmission family (the Hydra-Matic 6T40/6T45 style). These transmissions include an internal filtration system to catch debris and protect the gears and hydraulic components. The filter is typically located in or just under the transmission pan and is serviced as part of a pan drop procedure.
Where is the filter and how is it serviced?
The filter in these transmissions is not an easily accessible external cartridge. It is part of the pan assembly and is replaced when the pan is removed for service. Proper service usually involves removing the transmission pan, replacing the filter, cleaning the pan, installing a new gasket, and refilling with the correct automatic transmission fluid.
Before undertaking a service that involves the pan, it helps to understand the typical steps and what you’ll need.
If you’re planning a pan drop and filter replacement, here’s what to expect:
- Warm the vehicle and safely raise and support it before removing the pan.
- Carefully drain the old transmission fluid into a suitable pan.
- Remove the pan, inspect the pan and valve body area, and replace the transmission filter.
- Clean the pan, install a new gasket, and reinstall the pan.
- Refill with the correct type and amount of transmission fluid (typically Dexron VI for these GM 6-speed units) and check for leaks.
In summary, the 2013 Malibu does have a transmission filter, and servicing it generally requires removing the pan and replacing the filter as part of a full pan service.
What this means for maintenance and repairs
For routine maintenance, many owners opt for a pan drop with filter replacement at intervals recommended by GM or a trusted shop, especially if the vehicle has accumulated significant mileage or heavy use. If you’re unsure about performing this work yourself, a certified technician can provide the correct filter, gasket, and fluid specifications for your specific Malibu model and engine type.
Summary
The 2013 Chevy Malibu uses a 6-speed automatic transmission that includes a built-in filtration system. The filter is usually replaced during a pan service, which involves draining the fluid, removing the pan, replacing the filter and gasket, cleaning the pan, and refilling with the proper transmission fluid. This is not a simple on-the-road filter change and is best performed when performing a pan drop service.
Does a 2012 Chevy Malibu have a transmission filter?
Hello everyone today we're working on a 2012 Chevrolet Malibu we're going to do a transmission flush on it this transmission in this car is a 6T70. And it does not have a dipstick. And uh it does not
Is it necessary to change the transmission filter when changing transmission fluid?
However, ideally, you'll want to change your filter before any of these problems come up. Keeping that in mind, it's recommended that you change your transmission filter whenever you have to perform a transmission fluid change. Usually, your owner's manual will inform you when you need to do this.
Where is the transmission control module on a 2013 Chevy Malibu?
Down we'll be able to see a lot a lot of uh fuses. And it's located. Right under the fuse. Box. Right there so let's take it. Out.
How many filters does a Chevy Malibu have?
There are two basic air filters in your Chevy Malibu. The engine air filter is located in the engine bay and is used to filter out harmful and dangerous particles that may cause damage to your vehicle's engine.
