How do I turn off cruise control on my Acura?
Turning off cruise control on your Acura is a straightforward process that can be done in a few simple steps. Cruise control is a convenient feature that allows you to maintain a constant speed without having to constantly press the accelerator pedal, but there may be times when you need to disengage it, such as when driving in heavy traffic or on winding roads.
Steps to Turn Off Cruise Control
- Locate the cruise control buttons or switches on your Acura's steering wheel or dashboard. These are typically labeled with "CRUISE" or have a symbol of a car with an arrow.
- Press the "CANCEL" button or switch to disengage the cruise control. This will immediately stop the cruise control function without erasing the set speed.
- Alternatively, you can tap the brake pedal to disengage the cruise control. This will also immediately stop the cruise control function.
- If you want to completely turn off the cruise control system, locate the "CRUISE" or "ON/OFF" button or switch and press it to turn the system off.
By following these simple steps, you can easily turn off the cruise control on your Acura when needed, allowing you to regain full control of your vehicle's speed.
Reasons to Turn Off Cruise Control
There are several situations where it's recommended to turn off cruise control, including:
- Heavy traffic or stop-and-go driving: Cruise control is not well-suited for heavy traffic or situations where you need to frequently adjust your speed, as it can cause your car to accelerate or decelerate unexpectedly.
- Winding or hilly roads: Cruise control may not be able to maintain a consistent speed on winding or hilly roads, and can cause your car to speed up or slow down unexpectedly.
- Inclement weather: In wet, snowy, or icy conditions, it's generally better to have full control over your vehicle's speed and acceleration to maintain traction and stability.
- When towing a trailer: Cruise control can be less effective and more difficult to control when towing a trailer, so it's best to turn it off in these situations.
By being aware of when to turn off cruise control, you can ensure a safer and more comfortable driving experience in your Acura.
How do I turn on cruise control in an Acura?
And following interval from vehicles detected. Ahead when the detected vehicle ahead changes speed ACC adjusts your vehicle speed accordingly to maintain separation acc works at speeds above 40 kmh.
How do I get my car out of cruise mode?
To cancel cruise control, tap the brakes, pull the stalk towards you or turn the system off with the ON/OFF button. Adaptive Cruise Control was designed to maintain the preset distance between your car and the car driving in the same lane directly ahead of you.
How do I turn off cruise mode on my Acura?
To turn off the cruise control on an Acura, press the CANCEL button, the MAIN button, or the brake pedal. Pressing the MAIN or CANCEL buttons will disengage the system while leaving the cruise control on and ready to resume, while pressing the brake pedal will immediately disengage the system and turn off the cruise control light.
This video demonstrates how to turn on and off cruise control on an Acura: 58sMarin AcuraYouTube · Dec 28, 2018
Immediate cancellation
- Press the brake pedal: This is the quickest way to disengage cruise control and take manual control of your speed.
- Press the CANCEL button: This will disengage cruise control without turning off the entire system. The "CRUISE MAIN" light will remain on, but cruise control will not be active until you press RESUME.
Full system deactivation
- Press the MAIN button: Pressing the MAIN button will turn the system off completely, and the "CRUISE MAIN" light will turn off.
- Press the brake pedal: Pressing the brake pedal will also turn off the cruise control system completely.
Additional tips
- Resume speed: If you've disengaged cruise control, you can resume your previously set speed by pressing the RESUME button, as long as your vehicle is moving above a certain speed.
- Adaptive cruise control (ACC): If you are using adaptive cruise control, you can switch to standard (non-adaptive) cruise control by holding the distance adjustment button for one to two seconds. The display will show a new mode on the multi-information display.
This video shows how to use standard and adaptive cruise control on an Acura: 1mCars With SteveYouTube · Jul 14, 2025
Where is cruise control on acura mdx?
Process. And it's all done using the switches along the right hand side of the steering wheel here so you've got a series of buttons. The one along the top right side turns the system on or off.
