How do you change the speedometer to mph on a Honda Pilot?
Switching the speedometer to mph on a Honda Pilot is done through the instrument cluster’s settings. With the ignition on, use the steering wheel controls to navigate to the Units or Speed Units option and select MPH.
Where the speed unit setting lives in the Pilot’s interface
The speed unit option is typically found in the Driver Information Interface or Multi-Information Display. The exact path varies by generation: newer Pilots expose the option through the steering-wheel menu, while older models use the toggle/select controls on the instrument panel. If you don’t see a dedicated “MPH” option, look for a “Units,” “Display,” or “Speed Units” submenu and toggle to MPH.
Step-by-step: Newer Honda Pilot models (2020–present)
Below are the common steps you’ll follow on current-generation Pilots. The exact wording may differ slightly by trim, but the general flow is the same.
- Turn the ignition to ON (engine can be running or in accessory mode, depending on the model).
- Press the MENU/INFO button on the steering wheel to access the Driver Information Interface (DII) or Multi-Information Display.
- Use the left/right arrows or the OK/Enter button to navigate to Settings or Units within the DII.
- Select Units (or Speed Units) and choose MPH from the available options.
- Exit the menu or confirm the selection to apply the change.
This path updates the speed readout across the instrument cluster and digital displays. If you can’t find the option, consult your owner’s manual for the exact menu labels for your trim/year.
Step-by-step: Older Honda Pilot models (2009–2019)
Older Pilots rely on the instrument cluster’s onboard menus and, in some cases, the selector knob near the odometer. The steps below reflect the common workflow for those generations.
- Turn the ignition to ON with the vehicle in Park (engine may be off or on, depending on year).
- Locate the SELECT/RESET knob or the equivalent control on the instrument cluster and press it to bring up the settings menu.
- Rotate or use the arrows to highlight Units or Speed Units within the menu.
- Select MPH and confirm with the knob or a nearby OK/Enter control.
After confirming, the speedometer and any related digital readouts should switch to MPH. If the option isn’t visible, refer to the owner’s manual for your exact model year, as some trims route unit changes through a slightly different menu path.
Tips and common questions
If the speed units won’t change, ensure the ignition is in the correct power state (some models require “ON” rather than just ACC) and that you’re navigating the proper submenu for units. If a unit option is missing entirely, it may be locked by a regional spec or require a software update. In rare cases, a service bulletin or dealership assistance may be needed to enable the feature.
Summary
Changing the Honda Pilot’s speedometer to MPH is a straightforward process tied to the instrument cluster’s unit or display settings. Whether you’re using a newer model with the steering-wheel menu or an older one with the SELECT/RESET knob, you’ll locate a Units or Speed Units option, select MPH, and confirm. If you run into menu differences by year, consulting the owner’s manual or contacting a dealer can provide model-specific guidance. The result is a speed readout that matches your preferred measurement system across the vehicle’s gauges and displays.
