How many miles per gallon does a 2013 Ford Escape 2.0 EcoBoost get?
The 2013 Ford Escape 2.0 EcoBoost typically achieves about 25 miles per gallon combined with front-wheel drive and around 24 mpg combined with all-wheel drive. Actual mileage varies based on drivetrain, driving style, and conditions.
Overview of mpg by drivetrain
Ford offered the 2.0L EcoBoost engine in two main configurations for the Escape in 2013: front-wheel drive (FWD) and all-wheel drive (AWD). The official EPA estimates reflect these setups paired with the six-speed automatic transmission common to that model year.
Before looking at the specific numbers, note that mileage figures are EPA estimates and can differ in real-world use due to factors like terrain, climate, tire selection, and maintenance.
Here are the EPA-estimated fuel economy figures for the 2.0 EcoBoost engine across the two drivetrain configurations:
- FWD: 22 mpg city / 31 mpg highway / 25 mpg combined
- AWD: 21 mpg city / 28 mpg highway / 24 mpg combined
In real-world driving, these figures can deviate based on how the vehicle is driven, whether the car is loaded, and road conditions. Turbocharged engines like the 2.0 EcoBoost can show improved highway efficiency with steady cruising, but city driving may reduce mpg due to turbocharger spooling and stop-and-go traffic.
How mpg numbers are calculated
EPA fuel economy tests for 2013 model-year vehicles measure city and highway efficiency using standardized procedures and then combine them into a single average. The resulting numbers are used for comparison and consumer guidance, but real-world results depend on factors such as acceleration, idling, climate control usage, and driving habits.
Real-world vs EPA estimates
Drivers may see higher mpg on highway trips with light loads and steady speeds, while urban commuting or heavy acceleration can lower mpg. Maintaining proper tire pressure, using the recommended grade of gasoline, and keeping the engine well-tuned can help approach the EPA estimates.
Notes for buyers and owners
When evaluating a used 2013 Escape 2.0 EcoBoost, confirm whether the vehicle is FWD or AWD, as this significantly affects mpg. Also consider wear on tires, any added weight from accessories, and whether the vehicle has modern efficiency-related updates or wear-related efficiency losses.
Additional considerations
Environmental conditions, seasonality, and the vehicle’s maintenance history can all influence fuel economy. If possible, review a vehicle history or perform a test drive to gauge real-world mpg under your typical driving patterns.
Summary
For the 2013 Ford Escape 2.0 EcoBoost, expect about 25 mpg combined with front-wheel drive and about 24 mpg combined with all-wheel drive, with EPA estimates of 22/31/25 (FWD) and 21/28/24 (AWD). Real-world results will vary, but these figures provide a solid benchmark for planning fuel costs.
