How many quarts of oil does a 07 Ford Taurus take?
Most 2007 Tauruses with the common 3.0-liter Duratec V6 require about 5 quarts of engine oil with a filter. Some earlier or alternate 3.0-liter configurations may use roughly 4.5 quarts.
The exact capacity depends on the engine installed in the vehicle. In 2007, Ford offered at least two V6 options for the Taurus, and each engine has a slightly different oil-fill requirement. Always verify with the owner's manual or the engine’s service data, and use the recommended oil grade for your climate and engine (commonly 5W-20 or 5W-30).
Engine options and oil capacity
The following outlines the likely oil capacities for the 2007 Taurus based on its engine type.
- 3.0L Duratec V6 — approximately 5 quarts of oil with a filter.
- 3.0L Vulcan V6 — approximately 4.5 quarts of oil with a filter.
Capacity can vary by production date or specific model configuration. Always confirm with your vehicle’s manual or the information plate under the hood.
Summary
In brief, the 2007 Ford Taurus typically takes about 5 quarts of oil for the Duratec 3.0L engine and about 4.5 quarts for the Vulcan 3.0L engine, including the oil filter. Use the recommended oil grade and verify exact capacity for your specific vehicle.
How much oil does a 2007 Ford Taurus need?
The 2007 Ford Taurus requires 4.5 quarts of 5W-20 motor oil for a standard oil change with a filter for the 3.0L V6 engine. Some sources indicate that the 3.0L DOHC engine may require 6 quarts of oil, so it's best to verify your specific engine configuration.
Oil capacity for 2007 Ford Taurus
- 3.0L V6: 4.5 quarts (with filter)
- 3.0L DOHC V6: 6 quarts (with filter), according to some sources
Important
- Always check your vehicle's owner's manual or the dipstick to confirm the exact capacity and oil level after an oil change.
- Use the recommended oil viscosity, which is typically 5W-20 for this vehicle.
How many quarts of oil does a 4.6 L Ford take?
The oil capacity for a Ford 4.6L engine is typically 6 quarts, though it can vary depending on the specific model year and vehicle. For example, some 2004-2010 Ford F-150s with this engine take 6 quarts with a filter, while some older models or other vehicles like a 2000 Crown Victoria may use 5 quarts. Always check the owner's manual for the exact specification for your vehicle.
- Check the owner's manual: The most accurate information will be in your vehicle's owner's manual.
- Typical capacity: A common capacity for many Ford 4.6L engines is 6 quarts when changing the oil filter.
- Model year variation: Some models might require 5 quarts, while others could require up to 7 quarts.
- After filling: Always check the dipstick after refilling to ensure the oil level is correct, as capacities can vary.
How many quarts of oil does a Ford Taurus take?
A Ford Taurus takes between 4.5 and 6 quarts of oil, depending on the model year and engine size. For example, a 3.0L V6 engine requires about 4.5 quarts, while larger 3.5L and 6-cylinder engines typically need 6 quarts. Always check your owner's manual to confirm the exact capacity for your specific vehicle before adding oil.
- 4.5 quarts: Some older 3.0L V6 engines, such as in a 1999 model, need approximately 4.5 quarts.
- 6 quarts: Many newer 3.5L V6 engines, including those found in models from 2010 to 2019, require 6 quarts of oil when the filter is changed.
- Always check: It is best to consult your vehicle's owner's manual or the sticker under the hood for the most accurate oil capacity for your specific year and engine.
How much oil does a 2007 Ford 3.5 take?
5.5 quarts
Capacity: 5.5 quarts (with filter).
