How many quarts of oil does a 2016 4Runner take?
In brief, the 2016 Toyota 4Runner with the 4.0-liter V6 uses 6.6 quarts of engine oil for a full oil change with a new filter.
Beyond that number, the exact amount you need can depend on whether you’re changing the filter, the oil grade you use, and the condition of your engine. The official capacity applies to the 1GR-FE 4.0L V6 powerplant found in the 2016 4Runner, and technicians typically fill to the full mark after replacing the oil filter and letting the engine settle.
Capacity specifics for the 4.0L V6
The 2016 4Runner uses Toyota’s 1GR-FE 4.0-liter V6. Its oil capacity with the filter installed is listed as 6.6 quarts (6.3 liters). This figure appears in owner manuals and service references for vehicles equipped with this engine. When performing a standard oil change with a new filter, you should plan to obtain roughly 6.5–6.6 quarts and then adjust to the proper dipstick reading.
Practical considerations for the oil change
Use the manufacturer-recommended oil grade and viscosity for your climate. For many 2016 4Runners, Toyota recommends a synthetic oil with a viscosity such as 0W-20 or 5W-30 depending on market and operating conditions. Always replace the oil filter during the change, run the engine briefly to circulate the oil, then recheck the level and add small amounts as needed until the dipstick reads within the correct range.
Bottom line
Plan on about 6.6 quarts of oil for a full change with a new filter on a 2016 4Runner’s 4.0L V6. Verify the level with the dipstick after filling and topping off, and consult your owner’s manual for any model-specific notes.
Summary
The 2016 Toyota 4Runner’s 4.0L V6 engine requires roughly 6.6 quarts of engine oil for a complete change with a new filter. This capacity should guide oil purchases and service planning; always confirm with the dipstick and follow the manual for the correct oil grade and any regional recommendations.
How many quarts of oil does a V6 4Runner take?
6.6 quarts
How much oil does a 2021 Toyota 4Runner take? A 2021 Toyota 4Runner takes 6.6 quarts of oil.
How much oil does a 3.5 L V6 Toyota engine take?
6.1 quarts
3.5L V6 Engine: 6.1 quarts with filter. 2.5L Hybrid Engine: 4.5 quarts with filter.
How much oil does a 2.5 L 4 cylinder engine take?
Capacities and Specifications - 2.5L
| Item | Capacity |
|---|---|
| Engine oil fill capacity including the oil filter. | 5 L (1.1 gal) |
| Engine oil fill capacity excluding the oil filter. | 4.6 L (1.0 gal) |
| Engine coolant fill capacity. | 6.8 L (1.5 gal) |
| Fuel tank fill capacity. | 60 L (13.2 gal) |
How many quarts of oil does a 3.0 V6 Toyota take?
5 quarts
Pour 5 quarts of 10W-30 automobile oil into the engine. Use one hand to stabilize the funnel to help prevent spills.
