How many quarts of oil does a 2017 Ford Fusion 1.5 L take?
About 4 quarts of engine oil (including the filter) are required for a full oil change on the 2017 Ford Fusion with the 1.5 L EcoBoost engine.
Capacity specifics for the 1.5 L EcoBoost
Ford’s official specification for the 1.5 L EcoBoost Fusion lists an oil capacity of 4.0 quarts when performing a standard oil change with a new filter. This figure covers the typical fill needed to reach the proper level after draining the old oil and replacing the filter. Actual capacity can vary slightly due to filter choices or servicing conditions, so always verify with the owner's manual or a Ford technician for your exact VIN.
Variations and practical notes
In practice, you may see small variations in published numbers, but the 4.0-quart figure is the standard guideline to use when planning an oil change for this engine. Use the dipstick to confirm the final level after adding oil and running the engine for a short period, then recheck and top off as needed.
Oil type and maintenance considerations
Beyond capacity, selecting the right oil and following proper maintenance intervals helps protect the engine. For most 1.5 L EcoBoost engines in the Fusion, a synthetic oil of the correct viscosity is recommended, and the oil change interval should follow Ford’s guidance based on driving conditions. Consult the owner's manual for the precise oil specification and maintenance interval for your climate and usage.
Before your oil change, prepare with the correct filter and oil grade. The following quick checklist helps ensure you achieve the correct fill during a change:
- Oil capacity with filter: 4.0 quarts.
- Always replace the oil filter during a full oil change.
- After adding oil, run the engine briefly and check the level with the dipstick.
- Avoid overfilling; fill to the full mark on the dipstick if needed, then recheck.
Concluding guidance: Start with about 4 quarts, run the engine to circulate the oil, then verify with the dipstick and top off to reach the recommended level without exceeding it.
Summary
The 2017 Ford Fusion with a 1.5 L EcoBoost engine typically requires 4.0 quarts of engine oil (including the filter) for a standard oil change. Always confirm this capacity in the owner's manual for your specific vehicle and use the dipstick to verify the final oil level after topping off.
How many quarts of oil for a 1.5 L engine?
Honda Civic 1.5L Turbo
The Honda Civic with a 1.5L Turbo engine requires approximately 3.7 quarts (3.5 liters) of oil. It's important to use the recommended oil type to ensure optimal performance and longevity of your engine.
How much oil does a 2017 1.5 l Ford Fusion take?
Capacities and Specifications - 1.5L EcoBoost
| Item | Capacity |
|---|---|
| Engine oil (with oil filter). | 3.832 L (4.05 qt) |
| Engine coolant. | 10.3 L (10.9 qt) |
| Brake fluid. | Between MIN/MAX on brake fluid reservoir |
| Automatic transmission fluid. | 8.5 L (9.0 qt)* |
What engine oil does a 2017 Ford Fusion take?
For modern Ford Fusion sedans, the manufacturer suggests SAE 5W-20 or SAE 5W-30 Motorcraft full synthetic oil for the gasoline engine. If you own a Ford Fusion hybrid, Ford recommends SAE 0W-20 oil that works for lower temperatures.
How much oil does a 1.5 EcoBoost engine take?
The engine oil capacity for a 1.5L EcoBoost engine is 4.05 quarts (3.832 L) with an oil filter change, though some models may differ. For example, the 2022 Ford Escape with this engine has a capacity of 5.3 quarts (5.1 L) for regular service or 5.6 quarts (5.3 L) for a dry engine. Always check your vehicle's owner's manual to confirm the exact capacity and recommended oil type for your specific model and year.
1.5L EcoBoost oil capacity by model (when applicable)
- General Capacity: 4.054.054.05 quarts (3.8323.8323.832 L) with filter.
- 2022 Ford Escape: 5.35.35.3 quarts (5.15.15.1 L) for regular service, or 5.65.65.6 quarts (5.35.35.3 L) for a dry engine.
- 2018 Ford Escape: 4.284.284.28 quarts (with filter).
Important considerations
- Check your manual: The exact capacity can vary by vehicle model and year. Always consult your owner's manual to ensure you use the correct amount.
- Use the right oil: Ensure the oil you use meets the specific Ford specifications for your vehicle, such as WSS-M2C913-C.
- Check the level: After adding oil, run the engine for a few minutes, turn it off, and then check the oil level with the dipstick to ensure it's within the correct range.
