How many quarts of oil does a 2024 Acura Integra take?
About 3.1 quarts of engine oil, including the filter, are required for a standard oil change on the 2024 Integra's 1.5-liter turbo engine.
The 2024 Integra uses a 1.5-liter turbocharged engine, the same family of engines used by the Civic line. The official capacity is 3.1 quarts with the filter, and the recommended oil is synthetic 0W-20. Always verify in the owner's manual for your exact vehicle, as production dates and trim levels can affect specifications.
Official capacity and oil specification
Here is a concise breakdown of the official spec and the recommended oil to use during a change:
- Oil capacity (with filter): 3.1 quarts
- Recommended oil: 0W-20 synthetic
- Oil specification: API SP and ILSAC GF-6 compatibility
- Preferred brands: Honda/Acura-branded oil or an equivalent meeting the same specs
In most cases, you should plan for about 3.1 quarts when performing an oil change with a new filter. Always fill gradually and recheck the level with the dipstick after starting the engine and letting it run briefly to circulate the oil.
Maintenance tips and service interval considerations
For the 2024 Integra, use 0W-20 synthetic and follow the owner's manual schedule. Under normal driving conditions, many Acura/Honda models with this oil meet a typical service interval of about 7,500 miles (12,000 km); this can be shorter under severe conditions such as heavy stop-and-go traffic, extreme temperatures, or towing. Always consult the manual or your dealer for the exact interval for your vehicle.
At-home oil-change checklist
To prepare for an oil change, gather the right supplies and follow a careful procedure. The following steps outline a typical at-home change, assuming a level surface and cooled engine.
- Warm the engine to operating temperature, then turn it off and allow it to cool briefly.
- Place a drain pan beneath the oil pan and remove the drain plug to let the old oil drain out.
- Replace the oil filter with a new one and lubricate the new filter seal with a bit of fresh oil.
- Reinstall the drain plug and tighten to the manufacturer’s specification.
- Pour in about 3.1 quarts of 0W-20 synthetic oil using a funnel, then start the engine and check for leaks.
- Turn off the engine, wait a few minutes, then recheck the oil level with the dipstick and top up if necessary.
After completing the change, dispose of old oil properly and reset any maintenance reminders if your vehicle has them. If you’re uncertain about the procedure, a professional service visit is recommended.
Summary
The 2024 Acura Integra requires approximately 3.1 quarts of engine oil (with the filter) for a standard oil change, using 0W-20 synthetic that meets API SP and ILSAC GF-6 specifications. Always consult the owner's manual or a dealership for model-specific guidance and follow the recommended service intervals to maintain optimal engine health.
