How many quarts of oil does a 2.4 Dodge Dart take?
Approximately 5 quarts of engine oil are needed for a full change on the 2.4-liter Dodge Dart, including a new oil filter. Always verify with the owner's manual or the dipstick for your exact model year and configuration.
Official oil capacity for the 2.4L Tigershark engine
For the 2.4L inline-four used in the Dodge Dart (and related Chrysler platforms), the standard oil capacity with a new filter is 5.0 quarts (approximately 4.7 liters).
Note: Capacity can vary slightly with aftermarket filters or unusual drain procedures. Use the dipstick to confirm the final level after adding oil.
How to perform a typical oil change (capacity-focused steps)
When planning an oil change, follow these practical steps to ensure you reach the correct level and avoid overfill:
- Drain the old oil completely from the engine.
- Replace the oil filter with a new one.
- Add 5 quarts of the recommended oil (start with 4 quarts, then top up as needed).
- Check the oil level with the dipstick and add small amounts until the level is between the "Full" marks.
After changing the oil, run the engine to circulate oil and recheck the level. Add more if necessary to reach the correct range.
Practical tips and reminders
Always use the oil grade recommended by Chrysler for your climate and model year, and consult the owner's manual. Some markets or model years may specify different viscosity, but the capacity remains around 5 quarts with filter.
Summary
In short, the 2.4-liter Dodge Dart typically requires about five quarts of engine oil for a full change with a new filter. Confirm with your manual and dipstick for exact needs on your vehicle.
What oil does a 2014 Dodge Dart 2.4 L take?
The recommended oil for a 2014 Dodge Dart 2.4L is 0W-20 full synthetic motor oil, with a capacity of 5.5 quarts when changing the filter. Always double-check the owner's manual for the most accurate information and consider using an oil that meets the Chrysler MS-6395 specification, such as the one mentioned in this Blauparts result.
- Oil Type: 0W-20 Full Synthetic Motor Oil
- Capacity: 5.5 quarts (including filter)
- Specification: Look for oils that meet the Chrysler MS-6395 specification.
- How to confirm: Check the oil cap on your engine for the specific oil type and weight recommended by the manufacturer.
How much oil does a 2.4 L 4 cylinder engine take?
5.6 quarts (with filter).
How much oil does a 2.4 Dodge engine take?
The oil capacity for a Dodge 2.4L engine is 4.3 to 4.5 quarts (or 4.3 liters), though some models like the Dart or certain Journey versions may require slightly more, up to 5.5 quarts. It is crucial to check the specific model year and vehicle manual for the most accurate information, as well as the correct oil viscosity, which is commonly 5W-20 or 0W-20 for these engines.
| Year | Model | Oil Capacity |
|---|---|---|
| 2018 | Dodge Journey | 4.5 quarts (with filter) |
| 2019 | Dodge Journey | 4.3 liters (4.5 quarts with filter) |
| 2020 | Dodge Journey | 4.5 quarts (with filter) |
| 2013-2016 | Dodge Dart | 5.5 quarts (with filter) |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_9tolaeHrNoSAi-gPyrriyAE_137';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
Important considerations:
- Always check your vehicle's owner's manual for the exact oil capacity and viscosity for your specific year and model.
- If changing the filter, you will need to add more oil than if you are not.
- After refilling, check the oil level with the dipstick and add more if needed to ensure it is within the safe range.
- Use a funnel when adding oil to avoid spills around the engine bay.
How much oil does a 2.4 L Dodge Dart take?
Engine Oil
5.5 quarts (with filter).
