How many quarts of oil does a Ford Explorer need?
The Ford Explorer, a popular midsize SUV, typically requires 5 quarts of oil for a standard oil change. This amount can vary slightly depending on the specific model year and engine configuration, but 5 quarts is the general recommendation for most Ford Explorer vehicles.
Detailed Explanation
The Ford Explorer is a versatile and widely-used SUV that has been in production since 1990. Over the years, the oil capacity for this vehicle has remained relatively consistent, with most models requiring around 5 quarts of oil for a standard oil change.
The exact oil capacity can vary depending on factors such as:
- Model year: Newer Ford Explorer models may have slightly different oil capacities compared to older versions.
- Engine size: Larger engine configurations, such as the V6 or V8 options, may require more oil than the standard 4-cylinder engines.
- Transmission type: Vehicles with automatic transmissions may have a slightly higher oil capacity compared to those with manual transmissions.
In general, the recommended oil capacity for a Ford Explorer is as follows:
- 4-cylinder engines: 5 quarts
- V6 engines: 5.7 quarts
- V8 engines: 6 quarts
It's important to always refer to the owner's manual or consult with a qualified mechanic to determine the exact oil capacity for your specific Ford Explorer model and engine configuration. Proper oil maintenance is crucial for the longevity and performance of your vehicle.
How much oil does a 3.5 l V6 Ford Explorer take?
The Ford Explorer 3.5L V6 engine requires 6 quarts of oil with a filter change. The correct oil viscosity is typically 5W-20 for non-EcoBoost engines, while the turbocharged EcoBoost engine often specifies 5W-30. Always check your vehicle's owner's manual or the oil fill cap for the exact specification for your specific model.
Engine oil capacity and specifications
- Capacity: 6 quarts (with filter)
- Viscosity:
- Non-EcoBoost: 5W-20 is the typical recommendation.
- EcoBoost (Turbocharged): 5W-30 is the typical recommendation, as shown by Blauparts and AMSOIL.
- Type: Full synthetic is commonly used for both specifications.
Before you start
- Verify the oil specification: The most accurate information will be on the oil fill cap or in your owner's manual.
- Use a new filter: Always replace the oil filter when performing an oil change.
- Check the oil level: After refilling, run the engine briefly, then check the dipstick to ensure the oil level is within the cross-hatch area or at the upper dot.
How many quarts of oil do I need for a Ford Explorer?
The Ford Explorer oil capacity varies by model year and engine, but is typically 6 quarts for many V6 engines (like the 3.5L and 3.7L) and 5.2 or 5.7 quarts for the 4-cylinder 2.3L engine. Always confirm the correct amount for your specific vehicle, as capacity can differ between engine options.
By engine type
- 3.5L/3.7L V6: 6 quarts (5.7 L)
- 2.3L 4-cylinder: 5.2 quarts (with filter)
- 2.3L 4-cylinder: 5.7 quarts
Important considerations
- Confirm your specific model: The amount of oil needed can vary by engine, so it is best to check your owner's manual or the vehicle's oil cap for the most accurate information.
- Check the dipstick: After adding oil, always check the dipstick to ensure the level is correct and avoid overfilling.
- Don't forget the filter: The stated oil capacity is typically for a full oil change that includes replacing the oil filter.
How much oil does a 3.8 L V6 engine take?
Engine Oil
5 quarts (with filter). After refill check oil level.
How many quarts of oil does a 3.5 L V6 engine take?
6.0 qt
Capacities and Specifications - 3.5L Ecoboost
| Item | Capacity |
|---|---|
| Engine oil (with oil filter) | 5.7 L (6.0 qt) |
| Engine coolant | 12.4 L (13.1 qt) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
| Rear axle fluid (four-wheel drive) | 2.11 pt (1.0 L) |
