How many quarts of transmission fluid does a 1999 Chevy Suburban take?
The 1999 Chevy Suburban requires 4 quarts of transmission fluid to fill the transmission to the proper level. This is the standard amount needed for this specific vehicle model and year.
Detailed Explanation
The 1999 Chevy Suburban is equipped with a 4L60-E automatic transmission. This transmission has a total fluid capacity of 4 quarts, which is the amount needed to completely fill the transmission from empty. When checking or changing the transmission fluid, it's important to ensure the proper amount is added to avoid overfilling or underfilling the system.
Steps to Check and Change Transmission Fluid
- Park the vehicle on a level surface and apply the parking brake.
- Run the engine for a few minutes to warm up the transmission fluid.
- Locate the transmission dipstick and remove it to check the fluid level.
- Add transmission fluid in small increments until the level reaches the "full" mark on the dipstick.
- Do not overfill the transmission, as this can cause damage.
- If changing the fluid, drain the old fluid and replace it with 4 quarts of the recommended type.
Following these steps will ensure the 1999 Chevy Suburban's transmission is properly filled with the correct amount of fluid. Maintaining the proper fluid level is crucial for the transmission's longevity and optimal performance.
Is 4 quarts enough transmission fluid?
You might need 3 to 5 quarts of fluid for a standard automatic transmission car. -Suvs or trucks may need 5 to 7 quarts or more.
How many quarts of transmission fluid do I need for a drain and fill?
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.
How much transmission fluid does a 1998 Chevy Suburban hold?
11.2 quarts
For Automatic Transmission: 4L60-E....AF6
| Notes: | (1) This specification has been updated from Dexron II or III to Dexron VI per a Technical Service Bulletin from the manufacturer |
|---|---|
| Capacity: | 5 quarts Initial Fill. |
| Capacity: | 4 speed 4L60-E Total Fill 11.2 quarts. |
How much transmission fluid does a 1999 Suburban take?
7.7 quarts
Automatic Transmission Fluid
Capacity: 7.7 quarts Initial Fill.
How many quarts in a 4L60E transmission?
Automatic transmissions: 4L60-E: 11.2 quarts.
How much transmission fluid do I need for a 4L60e?
Automatic transmissions: 4L60-E: 11.2 quarts.
How much transmission fluid does a 1999 Chevy Silverado hold?
Transmission Fluid Change
| Automatic transmission fluid type | |
|---|---|
| From dry, including torque converter | |
| 4L60-E/4L65-E | 11.2 quarts |
| 4L80-E/4L85-E | 13.5 quarts |
| Manual transmission lube capacity |
How many quarts go in a 4L60E transmission?
4L60-E: 11.2 quarts.
How many quarts does a 5.3 Chevy transmission take?
For Automatic Transmission: 6L80....AF6
| Capacity: | 6 speed With O Cooling 6L80 Total Fill 12.2 quarts. |
|---|---|
| Capacity: | 6 speed With Cooling 6L80 Total Fill 12.4 quarts. |
| Capacity: | 6 quarts Initial Fill. |
How many quarts of transmission fluid does a Chevy Suburban use?
8 quarts
Capacity: 8 quarts (with filter). After refill check oil level.
