Loading

How many quarts of transmission fluid does a 2003 Acura TL take?

The 2003 Acura TL requires 3.7 quarts of transmission fluid. This is the standard amount needed to fill the automatic transmission of this particular vehicle model.


Detailed Explanation


The 2003 Acura TL is a midsize luxury sedan that was produced by Honda's premium Acura brand. It came equipped with a 3.2-liter V6 engine and a 5-speed automatic transmission. To maintain the proper operation of the automatic transmission, it is recommended to check and refill the transmission fluid as needed.


According to the Acura owner's manual and service information, the 2003 TL has a transmission fluid capacity of 3.7 U.S. quarts. This is the amount of fluid required to completely fill the transmission when performing a fluid change or top-up.


Transmission Fluid Maintenance


It's important to regularly check and maintain the transmission fluid level in a 2003 Acura TL. Here are some key tips:



  • Check the fluid level when the transmission is warm, typically after driving the vehicle for at least 30 minutes.

  • Use the dipstick to verify the fluid level is between the minimum and maximum marks.

  • If the level is low, add Acura genuine transmission fluid in 0.5 quart increments until the proper level is reached.

  • Completely drain and refill the transmission fluid every 30,000 miles or as recommended by Acura.

  • Only use the transmission fluid specified by Acura, which is typically a high-quality synthetic blend.


Proper maintenance of the transmission fluid is crucial for the long-term health and performance of the 2003 Acura TL's automatic transmission. Following the manufacturer's recommendations will help ensure smooth, reliable operation.

How many quarts of transmission fluid does a 2002 Acura TL type S take?


For Automatic Transmission: B7WA....SL040

Capacity:3.1 quarts Initial Fill.
Capacity:5 speed B7WA Total Fill 7.6 quarts.



How many quarts does an Acura TL transmission take?


Put the same amount of the proper new ATF (either ATF-Z1 or DW-1) into the transmission as drained out. This will likely require a bit more than three quarts (about 3.2 quarts, officially). That's why you have four quarts on hand.



How to check transmission fluid in a 2003 Acura TL?


How to Check Your Transmission Fluid

  1. Let your engine run for 10 minutes before proceeding, the engine must be warm to get an accurate reading.
  2. Find the transmission fluid dipstick.
  3. Remove the dipstick and touch the fluid.
  4. Use a rag to wipe off the dipstick.
  5. Use a funnel to bring the fluid level up to the proper level.



How many quarts are needed for a transmission fluid change?


Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.