How many tons is a Ford Excursion?
In general, a Ford Excursion weighs about four tons when fully loaded. Its curb weight sits roughly between 3.5 and 4.0 tons, while the factory gross vehicle weight rating (GVWR) sits around 4.5 to 4.8 tons, depending on year, engine and drivetrain. Exact figures vary by configuration, so checking the door jamb sticker on a specific vehicle is the most reliable method.
The Ford Excursion was produced from 1999/2000 to 2005 as a large, body-on-frame SUV built on Ford’s F-250/350 pickup truck chassis. Available engines included gasoline V8s, a V10 option, and, in some years, a 7.3-liter Power Stroke diesel. Weight figures depend on engine choice, 2WD vs. 4WD, and equipment levels, which affects payload and towing capacity. The following sections provide typical ranges to help readers understand how many tons a typical Excursion weighs in common configurations.
Weight ranges by configuration
Below are typical curb weights for common Excursion configurations to illustrate how heavy the vehicle is in everyday terms. Values are given in pounds and approximate tons (1 ton = 2,000 pounds).
- Gasoline-powered Excursions (5.4L V8 or 6.8L V10): roughly 7,600–7,900 pounds (about 3.8–3.95 tons). Four-wheel-drive versions add about 200–300 pounds, placing some models closer to 7,800–8,200 pounds (3.9–4.1 tons).
- Diesel-powered Excursions (7.3L Power Stroke): typically around 7,800–8,100 pounds (approximately 3.9–4.05 tons), with 4WD variants edging higher by a few hundred pounds.
- Two-wheel drive vs. four-wheel drive: 4WD models generally weigh more than their 2WD counterparts due to the transfer case, front differential, and additional drivetrain hardware.
Note: These figures are approximate ranges based on common configurations. Exact curb weight depends on year, engine, options, and any aftermarket equipment. For precise numbers, consult the vehicle’s door sticker or official spec sheets for a given year.
Gross Vehicle Weight Rating (GVWR) and payload
The GVWR represents the maximum permissible weight of the vehicle, including the chassis, body, interior equipment, occupants, cargo, and trailer tongue weight. Here are typical ranges seen across Excursion models:
- GVWR: commonly around 9,000–9,700 pounds (about 4.5–4.85 tons), varying with year, drivetrain, and trim.
- Payload capacity: typically in the range of 1,000–1,700 pounds (roughly 0.5–0.85 tons), depending on configuration and options.
Understanding GVWR and payload helps explain why the Excursion, while spacious, has limits on how much it can safely carry or tow. Always verify the exact GVWR and payload on the specific vehicle using its certification label or owner’s manual.
Practical takeaways for owners and buyers
When evaluating a Ford Excursion for towing, family use, or long road trips, weight figures matter for safety and performance. Consider the following:
- Check the exact curb weight and GVWR on the vehicle’s door jamb placard to determine payload capacity precisely.
- Factor in occupants, cargo, and any trailer tongue weight to ensure you stay within GVWR and avoid overloading the vehicle.
- Be aware that diesel-powered models and 4WD variants are heavier, affecting fuel economy, braking distances, and acceleration.
Owners who plan to tow should also review the Excursion’s stated tow rating, hitch configuration, and braking system compatibility with their trailer setup, as weight is a critical factor in safe towing performance.
Summary
The Ford Excursion weighs roughly 3.5–4.0 tons in curb weight and carries a GVWR around 4.5–4.8 tons, depending on year and configuration. Diesel versions tend to be heavier than gasoline models, and four-wheel-drive variants add weight as well. For any specific vehicle, the most accurate numbers come from the manufacturer’s labeling on the door jamb and the official documentation for that model year.
In the end, the Excursion’s heft is a defining trait—delivering robust towing and passenger capacity at the cost of increased fuel use and handling characteristics. Understanding its weight profile helps owners use the vehicle safely and within its design limits.
How much does a Ford Excursion weigh?
A Ford Excursion weighs between approximately 6,650 and 7,700 pounds, depending on the specific model, engine, and drivetrain. The lighter end of this range is for a 2-wheel drive, V8 model, while the heavier end applies to a 4-wheel drive model with a turbodiesel engine.
- V8, 2-wheel drive: Around 6,650 lbs
- Turbodiesel, 4-wheel drive: Just over 7,700 lbs
- Average: Can be around 8,400 lbs when loaded with fuel and other gear
Are excursions 3/4 ton or 1 ton?
Developed as a competitor for the 2500-series (3⁄4-ton) Chevrolet Suburban/GMC Yukon XL, the Ford Excursion was derived from the 3⁄4-ton F-250 Super Duty pickup truck (sharing its chassis with the regular cab, long-bed chassis).
How do I know if my truck is 3/4 ton or 1 ton?
Historically, these classifications meant a 1/2-ton truck had a 1,000-pound payload capacity, a 3/4-ton truck could accommodate a 1,500-pound payload, and 2,000 pounds was the maximum payload weight of a 1-ton truck.
Which Ford truck is a 3/4 ton?
The half-ton F-1 became the F-100; the F-2 and F-3 were combined into the 3⁄4-ton F-250, while the F-4 became the one-ton F-350.
