How much antifreeze does a 2009 Dodge Journey take?
The 2009 Dodge Journey uses about 7.0 quarts (roughly 6.6 liters) of 50/50 coolant for the 2.4-liter engine, and about 11 quarts (roughly 10.4 liters) for the 3.5-liter V6. Use a premixed 50/50 coolant or mix with distilled water as recommended in the owner's manual. Always verify the exact specification for your model if you’re unsure which engine you have.
Engine variants and coolant capacity
There are two engines offered for the 2009 Journey. The coolant capacity depends on which engine is installed. The figures below reflect typical capacities for standard fills in each configuration.
- 2.4L inline-4 engine: approximately 7.0 quarts (about 6.6 liters) of 50/50 coolant.
- 3.5L V6 engine: approximately 11 quarts (about 10.4 liters) of 50/50 coolant.
Note: Use the correct coolant type (usually Dex-Cool or an approved equivalent) and a 50/50 mix with distilled water unless premixed. When refilling, fill to the reservoir level and bleed the cooling system if your vehicle requires it. Capacity can vary slightly if components such as the heater core have been replaced or if the system has been drained for service.
How to verify and fill safely
To ensure an accurate fill, identify your engine type by checking the VIN or engine code under the hood. Use the appropriate coolant and follow the vehicle’s bleeding procedure after a fill if required by your model. If there’s any doubt about the engine configuration or the correct coolant, consult the owner's manual or a Dodge service professional.
- Confirm engine type (2.4L or 3.5L) before purchasing coolant.
- Choose a 50/50 premixed coolant or mix concentrated coolant with distilled water as directed.
- Bleed the cooling system after filling (if applicable) and ensure the level is within recommended marks.
In practice, these figures provide a reliable guide for a standard refill. For precise service limits, always refer to the official owner’s manual or a dealer’s specification sheet.
Summary
In summary, the 2009 Dodge Journey holds roughly 7.0 quarts of coolant for the 2.4L engine and about 11 quarts for the 3.5L engine, with a 50/50 coolant mix. Verify your engine type and follow proper filling and bleeding procedures to ensure a correct and complete fill.
