How much does a 1946 Ford 2n tractor weigh?
The bare 1946 Ford 2N typically weighs approximately 2,600–3,000 pounds, depending on tires and options. With ballast and attachments, total weight commonly rises to about 3,000–4,000 pounds, and can go higher with heavy implements or a loader. Weight varies by configuration and equipment, so exact numbers depend on what’s mounted on the tractor.
What determines the tractor's weight
The weight of a 1946 Ford 2N is not fixed; it shifts with tire choice, hydraulics, ballast, and attachments. Restoration projects, wear, and regional variations can also influence the reported figures. For buyers and restorers, understanding these factors helps explain the range you might see in listings or manuals.
Bare tractor weight (approx.)
Here are common bare-tractor weight ranges to illustrate how tire configuration affects the mass of the machine itself.
- Bare tractor with narrow front and turf/low-profile rear tires: 2,600–2,800 lb (1,180–1,270 kg)
- Bare tractor with standard agricultural tires: 2,800–3,000 lb (1,270–1,360 kg)
- Bare tractor with heavier or wide tires and/or front-end weights: 3,000–3,200 lb (1,360–1,450 kg)
In short, the bare 2N is typically in the mid-to-upper 2,000s to around 3,000 pounds, with the exact figure depending on tire size and any built-in equipment or optional features.
Ballast and attachments that add weight
Implements, ballast, and attachments can add substantial mass beyond the bare tractor. The totals vary widely depending on what’s mounted and how the machine is configured for a given job.
- Rear wheel ballast: typically 200–400 lb total (often from added wheel weights or ballast) depending on how many weights are used
- Front ballast: typically 100–200 lb (when front weights are installed)
- Front-end loader: roughly 300–600 lb, depending on model and mounting hardware
- Loader bucket: commonly 100–400 lb (varies by bucket size and material)
- Other rear implements (plows, cultivators, etc.): about 100–500 lb per implement, depending on size and type
With ballast and common attachments, it’s not unusual for the weight to approach 3,500–4,000 pounds or more, especially if a loader is present and rear ballast is heavy.
How to verify the weight for a specific machine
If you need an exact figure for a particular 1946 Ford 2N, use these steps to confirm the weight rather than relying on general ranges.
- Check the tractor’s data tag or serial plate for the original weight specification or model year details.
- Consult the original Ford N-series or 2N operator’s manual or a reputable restoration guide for baseline weights.
- Weigh the tractor on a commercial or farm scale, or use a wheel-weighted scale if available, with all ballast and implements attached as used in operation.
- Sum the bare tractor weight plus all ballast and attachments to obtain the total operational weight for your setup.
Getting an exact measurement from a scale or a verified manual is the most reliable way to determine the total for a given 2N configuration.
Summary
The 1946 Ford 2N’s weight varies primarily with tires, hydraulics, ballast, and attachments. Bare machines generally sit in the 2,600–3,000-pound range, while typical ballast and implements push the total toward 3,000–4,000 pounds or more. For precise figures on a specific tractor, refer to the data tag or manual, or weigh the machine with its usual attachments on a scale.
