How much does a 1987 Chevy V20 weight?
The curb weight of a 1987 Chevrolet V20 typically falls in the mid‑5,000s to mid‑6,000s pounds, with a gross vehicle weight rating (GVWR) around 9,000 pounds. The exact figure depends on configuration, including cab style, bed length, and engine.
What the V20 represents in 1987
The V20 designation referred to GM’s heavy‑duty one‑ton pickup in the C/K family. In 1987, buyers could choose different cab configurations, bed lengths, and drivetrain layouts, all of which influence weight.
Estimated curb weight by configuration
Weights for typical 1987 V20 configurations fall within these ranges; exact figures vary with engine type (gasoline vs diesel), options, and cab/bed combinations.
- Regular cab, long bed, 2WD: approximately 5,600–6,100 lb
- Regular cab, short bed, 2WD: approximately 5,500–6,000 lb
- Regular cab, long bed, 4x4: approximately 6,000–6,500 lb
- Crew cab variants (if equipped): approximately 6,400–7,000 lb
Note: These figures are typical ranges reported by owners and service literature. The exact curb weight can vary based on engine options, trim level, and installed equipment. For a precise number, check the vehicle’s data plate or weigh the truck on a certified scale.
How to verify the exact weight
To determine the precise weight of a specific 1987 V20, begin with the door‑jamb data plate, which lists GVWR and curb weight for that truck. If the plate is missing or illegible, you can weigh the vehicle on a certified scale with standard fluids and no cargo to obtain its curb weight, or refer to factory specifications for that exact build.
Summary
The weight of a 1987 Chevy V20 varies by configuration, but roughly sits in the 5,500–6,500 pound range for curb weight, with a GVWR near 9,000 pounds. For an exact figure, rely on the data plate or a certified scale measurement, taking into account cab style, bed length, and engine choice.
Is a Chevy C20 a 3/4 ton?
1960-1972 Chevrolet C20 3/4 Ton Pickup Truck, Nice Reinforced Rear Trailing Arms.
How much can a 1987 V20 tow?
V20: 6,600 lbs. and 8,600 lbs. V30: 9,200 lbs.
PDF
How much does a 1978 K20 weigh?
1978 C/K Pickup Differences
| Feature | C10 | K20 |
|---|---|---|
| GVWR | 4,900-5,600 pounds | 6,800-8,400 pounds |
| Drivetrain | RWD | 4WD |
| Axle Ratio | 3.07:1 | 4.10:1 |
| Front Brakes | 11.86" Rotor | 12.5" Rotor |
How much does a 1987 Chevy weight?
The 1987 Chevrolet R10 Custom Deluxe with a 4.3L V6 is classified as a half-ton truck, meaning its payload capacity is around 1,000 pounds. However, the curb weight typically ranges between 4,000 to 4,500 pounds depending on configuration.
