How much does it cost to replace a fuel pump on a Dodge Durango?
The typical total cost is roughly $400 to $900 in the United States, including parts and labor. Prices can vary based on model year, part choice, and local labor rates.
Fuel-pump replacement for a Dodge Durango usually involves an in-tank fuel-pump module, with variations by engine and generation. The final price depends on whether you choose aftermarket or OEM parts, the shop’s labor rate, and whether any related components (such as the sending unit or fuel filter) are replaced during the job. Always compare quotes from multiple shops to ensure you’re getting a fair price.
Cost breakdown
Costs break down into three main components: parts, labor, and potential add-ons. The following ranges reflect typical U.S. prices as of 2024–2025 and can vary by model year, location, and labor rate.
- Parts: The fuel-pump module (often sold as the whole sending unit) can range from about $80–$350 for aftermarket parts. OEM/dealer-part prices typically run about $200–$600, depending on the Durango’s year and engine configuration.
- Labor: Replacing an in-tank fuel pump usually requires accessing the tank, which can take 2–4 hours. Labor rates commonly run $75–$150 per hour, yielding roughly $150–$600 in labor.
- Additional costs: Diagnostic fees if the issue isn’t pre-identified, shop supplies, taxes, and potential add-ons (for example, replacing the fuel filter or sending unit if damaged) can add $50–$150 or more.
These figures provide a baseline for budgeting and quotes. Actual prices will depend on your specific Durango model year, part choice, and the shop’s labor rate.
Price ranges by scenario
Prices can vary significantly depending on where you have the work done and whether you use aftermarket or OEM parts. Here are common scenarios.
- Independent shop with aftermarket parts: roughly $350–$750 total.
- Dealership with OEM parts: roughly $600–$1,200 total.
- DIY approach (parts cost only, if you do the work yourself and supply the parts): typically $100–$500 for parts, depending on the pump module and sending unit.
In practice, your final quote will hinge on the pump part you choose and the local labor rate. It’s wise to obtain written, itemized quotes that separate parts and labor to compare options clearly.
Summary
Replacing a Dodge Durango fuel pump is a mid-range automotive repair. For most models, you’ll pay a few hundred dollars for aftermarket parts and a similar amount for labor, with higher costs if you opt for OEM parts through a dealer. Expect total bills in the ballpark of $400–$900 under typical circumstances, with dealer-level pricing climbing toward $1,000–$1,200 in some cases. Always verify whether the quote includes related components (like the sending unit) and any diagnostic fees, and request an itemized breakdown to compare options.
What is a symptom of a bad fuel pump?
Common symptoms of a bad fuel pump include a whining noise from the fuel tank, difficulty starting the car or long cranking times, and engine stalling or sputtering. Other signs are a loss of power during acceleration, poor gas mileage, and a "check engine" light. If you notice these issues, it's best to have your fuel pump diagnosed by a professional to prevent further damage.
Performance and starting issues
- Difficulty starting: The engine may crank but fail to start because the pump isn't supplying enough fuel pressure.
- Long cranking time: It takes longer than usual for the engine to start because the pump isn't holding pressure in the fuel line.
- Engine stalling: The engine may stall while driving or idling, which can be dangerous as power steering and brakes can be lost.
- Loss of power: You may feel a noticeable lack of power, especially when accelerating, going uphill, or carrying heavy loads.
- Sputtering or surging: The engine may sputter, hesitate, or surge unpredictably.
Other indicators
- Unusual noises: A loud whining or humming noise from the fuel tank area is a classic sign of a failing pump.
- Decreased fuel efficiency: The engine may burn more fuel as the pump struggles to deliver the correct amount.
- Check Engine Light: The light may come on, often in conjunction with other symptoms like stalling.
What is a fair price for replacing a fuel pump?
between $1,226 and $1,479
The average cost for a Fuel Pump Replacement is between $1,226 and $1,479. Labor costs are estimated between $233 and $342 while parts are priced between $993 and $1,137. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
What is the most common problem with Dodge Durangos?
Transmission Problems
Transmission issues are common in 2021-2025 Dodge Durango models. Many owners report hard shifting, transmission slipping, and overheating.
How much does it cost to replace a fuel pump in a Dodge Durango?
The cost to replace a Dodge Durango fuel pump typically ranges from $611 to over $1,400, including parts and labor. Prices vary depending on the model year, the type of parts used, and the service center (dealer vs. independent mechanic). A basic parts and labor estimate is generally between $400 and $850, but can be higher.
Factors affecting cost
- Vehicle age and model: Prices vary by year and specific Durango model. Older vehicles may have a different cost range than newer ones.
- Parts: You can choose between OEM (original equipment manufacturer) parts from a dealership or aftermarket parts from an independent repair shop or auto parts store.
- Labor: The amount of time it takes to replace the pump can range from one to six hours, which impacts the total cost. Independent mechanics may have lower labor rates than dealerships, but dealerships often use official, higher-quality parts.
- Location: The cost can also vary based on your geographic location.
Estimated costs
- Independent repair shop: Estimates range from approximately $786 to $1,062 for some models, with a fair repair range of $914 to $1,477 for others.
- Dealership: Estimates are higher, ranging from around $914 to $1,429 or even $1,294 to $1,429.
Cost-saving options
- DIY replacement: If you are comfortable doing it yourself, you can significantly reduce costs by avoiding labor fees.
- Aftermarket parts: Using aftermarket parts can lower the price of the parts themselves.
- Shop around: Compare prices at different local shops and dealerships for the most accurate estimate for your specific vehicle and location.
