How much does it cost to replace a wheel bearing on a Honda Pilot?
On average, replacing a wheel bearing (often the hub assembly) on a Honda Pilot runs about $300 to $600 per wheel in the United States, depending on part choice and labor rates. This article explains the typical cost breakdown, what drives price differences, and how to shop for a fair quote.
Wheel bearings in the Pilot are located in the wheel hubs. Front-wheel bearing work is usually more costly than rear due to access and the components involved. Prices vary by model year, region, and whether you replace just the bearing or the whole hub assembly. The information below outlines typical costs and the key factors that influence them.
Typical cost ranges for wheel bearing replacement
Here is a general breakdown of what you can expect to pay for parts and labor when replacing a wheel bearing on a Honda Pilot, depending on the replacement approach.
- Hub assembly replacement (bearing integrated) on the front wheels: typically $300–$600 per wheel, including parts and labor; OEM hub assemblies are higher, aftermarket options are usually on the lower end.
- Hub assembly replacement on the rear wheels: typically $250–$500 per wheel, depending on part availability and labor.
- Wheel bearing replacement when the bearing is serviceable (bearing-only replacement, less common on Pilots): parts typically $100–$300 per wheel, plus labor around $100–$200; total often $250–$500 per wheel.
Prices vary widely by shop, location, and vehicle year, so use these ranges as a guide and obtain formal quotes for your specific Pilot.
Factors that influence the price
Price can swing based on several factors. Consider the following when budgeting for a repair.
- Vehicle year and variant: Some years require different hub designs or bearing configurations, affecting part costs.
- Front versus rear: Front-wheel bearing/hub replacements are generally more expensive due to added components and accessibility.
- Parts choice: OEM (dealer) parts tend to be more expensive than aftermarket or remanufactured hub assemblies, with trade-offs in warranty and longevity.
- Labor rate and location: Urban areas and dealers typically charge higher labor rates than independent shops or rural locales.
- Additional repairs discovered during service: Rotor resurface or replacement, caliper work, axle issues, or alignment may add to the total.
Ask for a detailed written estimate that itemizes parts, labor hours, and potential add-ons to avoid surprises.
Tips to save money
Before you shop, consider these cost-saving strategies and questions to ask each shop.
- Get multiple quotes from independent shops and dealership service centers to compare labor rates and parts pricing.
- Request a clear breakdown of parts vs. labor and ask about warranties on both parts and workmanship.
- Compare OEM vs. aftermarket hub assemblies; weigh short-term savings against long-term reliability and warranty coverage.
- Ask whether other safe, non-concerning issues (like rotor condition or brake components) will be checked so you’re not charged for repeat labor.
With careful comparison, you can secure a fair price while ensuring a safe, reliable repair.
Summary
Replacing a wheel bearing on a Honda Pilot typically costs around $300–$600 per wheel in the U.S., with variations based on front versus rear location, hub-assembly versus bearing-only replacement, part choice (OEM vs aftermarket), and local labor rates. Always obtain a written, itemized estimate and consider warranty terms to protect your investment.
