How much fluid does a Dodge Ram transfer case hold?
The Dodge Ram transfer case typically holds between 1.5 to 2 quarts of fluid, depending on the specific model and year of the vehicle. The exact fluid capacity can vary, so it's important to consult your owner's manual or contact a Dodge dealer for the precise specification for your Dodge Ram.
Understanding the Dodge Ram Transfer Case
The transfer case is a critical component in four-wheel-drive (4WD) and all-wheel-drive (AWD) vehicles like the Dodge Ram. It's responsible for distributing power from the transmission to the front and rear axles, allowing the vehicle to operate in different drive modes, such as 2WD, 4WD, and low-range 4WD.
The transfer case requires a specific type of fluid to function properly. This fluid lubricates the internal components and helps to dissipate heat, ensuring the transfer case operates smoothly and efficiently. Maintaining the correct fluid level is essential for the long-term health and performance of the transfer case.
Checking and Changing the Transfer Case Fluid
- Locate the transfer case drain plug, usually on the bottom of the transfer case housing.
- Place a drain pan underneath to catch the old fluid as it drains out.
- Once the old fluid has drained, replace the drain plug and fill the transfer case with the recommended fluid type and quantity.
- Consult your owner's manual or a Dodge dealer to determine the correct fluid type and capacity for your specific Dodge Ram model.
- After filling the transfer case, start the engine and check for any leaks.
Regularly checking and changing the transfer case fluid according to the manufacturer's recommendations is essential for maintaining the health and longevity of your Dodge Ram's four-wheel-drive system.
How much diff fluid does a Ram 1500 take?
And add to it. So this has it so we don't have to add. It. I already cut this I might just swap it to each one so I don't have to keep cutting. It. So let's get that in.
How many quarts of fluid do I need for a transfer case?
Transfer Case Fluid Capacity and Specification (If Equipped)
| Variant | Quantity |
|---|---|
| All. | 1.9 qt (1.8 L) |
When should I change my transfer case fluid Ram 1500?
Some experts recommend changing the transfer case fluid every 20,000-30,000 miles. If you regularly tow heavy loads you must replace the transfer case fluid more often, usually around 20,000 miles. Transfer case fluid and transmission fluid are similar in purpose, but are not interchangeable.
What fluid should I run in my transfer case?
Most transfer cases are filled with an automatic transmission fluid, which is usually red in colour. Others use a thicker gear oil, and some use a specialized fluid that is specifically made just for that transfer case.
How much fluid does a Ram 2500 transfer case hold?
What Fluid Does My Dodge or Ram Transfer Case Take?
| Year Range | Model | Capacity |
|---|---|---|
| 2012-2018 | Ram 1500 | 3.0 Pints |
| 2012-2018 | Ram 2500, Ram 3500 | 3.8 Pints |
| 2012-2018 | Ram 4500, Ram 5500 | 3.8 Pints |
| 2016-2018 | Ram 1500 | 3.0 Pints |
How much transfer case fluid does a Ram 1500 take?
Ram 1500 Transfer Case Fluid Capacity
2021 - 2023 Ram 1500 TRX transfer case fluid fill capacity is 1.8 liters (1.9 quarts) for BorgWarner 48-13 transfer case.
Does the transmission and transfer case use the same fluid?
Both fluids serve as cooling lubricants for their respective systems. However, the two lubricants are different. While some transfer cases use automatic transmission fluid instead of dedicated transfer case fluid, the two are generally not interchangeable.
What oil goes in a Dodge Ram transfer case?
Ram recommends the use of a licensed ATF+4® MS-9602 specification fluid for the NV241, NV243, NV244, NV271, and NV273 type transfer case fluid change. This is an ATF for the transfer case.
How much fluid does a 1998 Dodge Ram transfer case hold?
Transfer Case Lubricant
Capacity: NP231, 233 2.5 pints.
What kind of rear differential fluid does a 1998 Dodge Ram 1500 take?
Penzoil 80W90 conventional gear Oil.
