How much freon does a 2004 Ford Expedition hold?
The 2004 Ford Expedition’s air-conditioning system is designed to hold roughly 2.6 pounds (about 1.2 kilograms) of Freon, specifically R-134a. The exact amount can vary depending on options such as rear climate control and factory configuration.
Understanding the capacity
Refrigerant capacity refers to the total charge needed to fill the closed A/C system from empty, including the compressor, condenser, evaporator, receiver-drier, and all connecting lines. Ford transitioned several years earlier to R-134a for this generation, replacing the older R-12 refrigerant. For your exact vehicle, always verify the weight listed on the hood label or in the official service documentation.
Typical capacity range by configuration
In practice, most 2004 Expeditions with standard front A/C aim for a charge near 2.4–2.6 pounds. Vehicles equipped with rear climate control can require slightly more, approaching 2.8–3.0 pounds. The hood label provides the definitive figure for your specific VIN and installed equipment.
To verify the exact capacity and ensure proper charging, technicians rely on the following guidance:
Before the list: The steps below outline common, safe practices used during refrigerant charging to avoid under- or overcharging.
- Identify the refrigerant type as R-134a and locate the official system capacity on the under-hood label.
- Consult the owner's manual or Ford service documentation for VIN-specific charge specifications.
- Evacuate the system with a vacuum pump to remove moisture and air before charging.
- Charge gradually using a calibrated scale to reach the specified weight; monitor with a manifold gauge set during the process.
- After charging, perform a leak check and test cooling performance under typical outdoor temperatures.
Following these steps helps prevent compressor damage and ensures reliable cooling performance. If you’re not trained in A/C work, consider having a certified technician perform the recharge.
Where to find the official capacity
Look for the refrigerant capacity label inside the engine bay (often on the radiator support or near the A/C accumulator). The label or the Ford service manual for your VIN will provide the exact charge weight and refrigerant type for your vehicle configuration.
Summary
For a 2004 Ford Expedition, the typical total refrigerant charge is about 2.6 pounds of R-134a, with slight variations based on options like rear A/C. Always verify the exact figure on the hood label or in the service manual for your specific vehicle, and seek professional service if you’re unsure about charging procedures or leak testing.
What kind of freon does a 2004 Ford Expedition take?
R-134a
Notes: R-134a. 15.6 oz. Refrigerant kit. With stop leak charging Hose/Gauge.
How much freon does a 5.4 triton hold?
Capacities and Specifications - 5.4L V8
| Item | Capacity |
|---|---|
| Fuel tank | 40 gal (151 L) |
| Fuel tank (Optional or E-Super Duty) | 55 gal (208 L) |
| A/C refrigerant | 1.9 lb (0.85 kg) |
| A/C refrigerant compressor oil | 8.0 fl oz (237 ml) |
How much freon does a 2004 Ford Explorer hold?
2004 Ford Explorer 4.6L: Correct Freon Capacity for A/C Recharge. Explorer 4.6L often faces A/C underperformance and refrigerant leaks causing cooling issues. The 2004 Ford Explorer 4.6L requires approximately 24 ounces (1.5 pounds) of R-134a refrigerant for a full A/C recharge.
How much freon does a Ford Expedition take?
Capacities and Specifications
| Item | Quantity |
|---|---|
| Washer system fill capacity. | 1.2 gal (4.5 L) |
| Fuel tank fill capacity. | 13.7 gal (52 L) |
| Air conditioning refrigerant fill capacity. | 22.05 oz (0.625 kg) |
| Air conditioning refrigerant compressor oil fill capacity. | 4.40 fl oz (130 ml) |
