Loading

How much freon does a 2012 Ford Fusion hold?

The 2012 Ford Fusion typically holds about 26–32 ounces of R-134a refrigerant, with 28 ounces commonly used as the target charge. Exact capacity depends on engine and HVAC configuration, so always verify with the vehicle’s service data or a precise weight-based recharge.


Understanding the capacity for the 2012 Fusion


The total refrigerant capacity refers to the entire air conditioning system, including the condenser, evaporator, lines, accumulator/drier, and expansion device. In this year, the system uses R-134a. Because factory specifications can vary by exact build and components, the most reliable value comes from Ford’s service documentation or a labeled service port on your vehicle.


Model and engine variations


In 2012, the Fusion offered several powertrain options, including a 2.5-liter inline-four and a V6. Small differences in the HVAC plumbing or added components can shift the exact charge slightly, but most owners will target around 28 ounces (roughly 0.8 kilograms). If major components were replaced (compressor, condenser, evaporator), re-check against the replacement parts’ guidance and a VIN-specific service sheet.


Charging by weight: best practice


For an accurate recharge, use a refrigerant scale and follow the manufacturer’s specified total charge. Relying on pressure readings alone can be misleading due to ambient temperature, humidity, and system condition. The following steps outline a general approach; consult your service manual for VIN-specific guidance.


To recharge by weight, here's a general procedure you can discuss with a trained technician or, if you have the proper tools, perform yourself:



  1. Ensure you are using the correct refrigerant (R-134a) and a scale-calibrated charging setup. Verify ambient temperature conditions are suitable for charging.

  2. Attach the low-side service hose to the blue port and confirm there are no leaks in the hoses or fittings.

  3. Begin charging slowly while monitoring the scale to reach the vehicle’s specified total system charge (approximately 28 oz, but confirm for your exact build).

  4. After reaching the target charge, run the engine with the A/C on max cool to stabilize the system and recheck pressures and temperatures. If pressures are off or cooling is weak, inspect for leaks or faulty components.


Following these steps helps ensure you reach the correct total system charge and avoid overcharging, but if you cannot reach the target, or if pressures remain outside specification, seek professional service for a leak check and precise final charge.


Additional considerations and safety


R-134a refrigerant is a regulated substance and a greenhouse gas. Handle it with care, follow local regulations for refrigerant disposal and recycling, and use appropriate safety equipment. If you are unsure about the process, it is wise to consult a certified automotive technician.


Summary


The 2012 Ford Fusion’s A/C system generally holds 26–32 ounces of R-134a, with 28 ounces serving as a common target. Exact capacity varies by engine and HVAC configuration. Use a scale-based charging method and consult Ford service data or VIN-specific manuals for precise numbers. If in doubt, seek professional service to ensure a proper charge and leak-free operation.

How much coolant does a 2012 Ford Fusion hold?


The 2012 Ford Fusion coolant capacity varies by engine, but generally ranges from 7.2 quarts (6.8L6.8 cap L6.8𝐿) for the 2.5L engine to 8.9 quarts (8.4L8.4 cap L8.4𝐿) for the 2.0L EcoBoost and 11.1 quarts (10.5L10.5 cap L10.5𝐿) for the 1.5L EcoBoost. Be sure to confirm the engine size of your specific vehicle to ensure you purchase the correct amount. 
Coolant capacity by engine

  • 2.5L: 7.2 quarts (6.8L6.8 cap L6.8𝐿)
  • 2.0L EcoBoost: 8.9 quarts (8.4L8.4 cap L8.4𝐿)
  • 1.5L EcoBoost: 11.1 quarts (10.5L10.5 cap L10.5𝐿) 



How much is freon for a 2012 Ford Fusion?


The average price for a 2012 Ford Fusion Refrigerant at Advance Auto Parts is around $15.64, with a range that starts at $13.49 and goes up to $17.49.



How much freon does a Ford Fusion take?


Technical Specifications

ItemCapacity
Front-wheel drive fuel tank16.5 gal (62.5 L)
All-wheel drive fuel tank17.5 gal (66.2 L)
A/C refrigerant 2.5L Engine (except E100)1.50 lb (0.68 kg)
A/C refrigerant 1.5L, 2.0L and 2.5L (E100) Engines1.23 lb (0.56 kg)



What freon does a 2012 Ford Focus take?


Essential Ford Focus Refrigerants
R-134a PAG 46 AC Oil Lubricant: with ICE 32 Lubricant Enhancer features advanced chemistry to help extend compressor life and improve cooling capacity.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.