How much freon does a 2015 Ford Explorer take?
The 2015 Ford Explorer uses R-134a refrigerant, and the system generally requires about 32 ounces (roughly 1 quart) of refrigerant for a full charge, though exact amounts can vary by model and whether the system already has some charge. Always verify the precise specification from the vehicle’s service data or the under-hood refrigerant label.
Refrigerant type and what it means for your charge
Understanding the correct refrigerant is essential. The 2015 Explorer is designed for R-134a refrigerant. Using the wrong type can damage the A/C system and void warranties. If you’re unsure, check the label on the service ports or consult the owner’s manual or Ford service data.
Estimated capacity for the 2015 Explorer
Before listing the typical capacity, note that exact amounts can differ slightly depending on trim, HVAC configuration, and whether the system already contains some refrigerant. Use this as a general guide, and confirm with the factory specification for your exact vehicle.
- Refrigerant type: R-134a
- Total system capacity: roughly 28–34 ounces (about 0.8–1.0 kg); many Ford sources quote around 32 ounces as a common figure
- Lubricant: PAG oil is used; the oil charge is typically added per the service data (often a few ounces, and charged by weight with the refrigerant)
In practice, the full charge is typically around a quart of R-134a, with an accompanying small amount of PAG oil. Exact figures should come from Ford’s official service data for your specific VIN and HVAC configuration to avoid overcharging or undercharging the system.
How to verify and perform a recharge safely
To ensure you charge correctly, follow official guidance and use proper equipment. Many jurisdictions require a licensed technician for refrigerant handling. If you’re attempting a recharge yourself, proceed with caution and refer to the vehicle’s service information and the refrigerant scale on your recharge canister.
- Confirm the refrigerant type on the vehicle’s under-hood label and service data
- Weigh the exact amount of R-134a to match Ford’s specified capacity for your model
- Charge gradually and monitor pressure gauges to avoid overcharging
- After charging, run the A/C to bring the system to operating temperature and recheck pressures
Always dispose of any used refrigerant canisters according to local regulations and never vent refrigerant gas into the environment. If in doubt, have a qualified automotive technician perform the service to ensure optimal cooling performance and system safety.
What to check before and after charging
Make sure the A/C system is leak-free and the compressor is engaging properly. A low or intermittent refresh may indicate a leak, which should be repaired before recharging. After a recharge, ensure the cabin reaches the expected temperatures and that the system maintains stable pressures during operation.
Summary
For a 2015 Ford Explorer, plan on about 32 ounces of R-134a refrigerant for a full charge, with a small additional amount of PAG oil as specified by Ford’s service data. Exact capacity can vary by trim and HVAC configuration, so always verify the precise figure from the factory service manual or the under-hood label. When in doubt, consult a licensed automotive technician to safely diagnose leaks and perform the recharge with the correct measurements.
What coolant does a 2015 Ford Explorer use?
Prestone Antifreeze and Coolant Orange Dex-Cool Concentrate.
How many ounces of R-134a do I need?
1.5 lbs. or 24 oz of R134A is what is required. Hand-turn the compressor 15-20 times after charging! Failure to do this may cause the reed valves to become damaged.
How much freon does a 2015 Ford Explorer hold?
The 2015 Ford Explorer 3.5L EcoBoost typically requires about 24-26 ounces of R-134a refrigerant. Low refrigerant levels cause poor cooling and compressor strain.
How much freon does a Ford Explorer need?
Capacities and Specifications
| Item | Quantity |
|---|---|
| Washer system fill capacity. | 1.2 gal (4.5 L) |
| Fuel tank fill capacity. | 13.7 gal (52 L) |
| Air conditioning refrigerant fill capacity. | 22.05 oz (0.625 kg) |
| Air conditioning refrigerant compressor oil fill capacity. | 4.40 fl oz (130 ml) |
