How much horsepower did the 1960 Ford 352 have?
The 1960 Ford 352 was a powerful engine that delivered impressive performance for its time. According to the available information, the 1960 Ford 352 engine produced 185 horsepower.
Exploring the 1960 Ford 352 Engine
The 1960 Ford 352 was a V8 engine that was part of Ford's FE engine family. It was introduced in 1958 and was used in a variety of Ford and Mercury models throughout the late 1950s and 1960s. The 352 was a larger displacement version of the earlier 292 and 312 cubic inch FE engines.
The 352 engine featured a cast-iron block and cylinder heads, and had a displacement of 352 cubic inches (5.8 liters). It was available in several different configurations, including a standard version and a high-performance version.
Horsepower and Performance
The standard 1960 Ford 352 engine produced 185 horsepower at 4,400 rpm and 332 lb-ft of torque at 2,600 rpm. This was a significant amount of power for the time, and allowed the 1960 Ford models equipped with the 352 to deliver brisk acceleration and respectable top speeds.
The high-performance version of the 352 engine, known as the "Thunderbird Special", produced even more power. This version featured a higher compression ratio, larger carburetor, and other upgrades that resulted in an output of 300 horsepower. This made the Thunderbird Special a true performance engine for the era.
Powering Ford's Lineup
The 1960 Ford 352 engine was used in a variety of Ford and Mercury models, including the Ford Galaxie, Ford Fairlane, Mercury Monterey, and Mercury Montclair. It provided a good balance of power and efficiency, making it a popular choice for both everyday driving and more spirited performance.
Overall, the 1960 Ford 352 was a well-regarded engine that helped define the performance capabilities of Ford's lineup in the early 1960s. Its combination of power, reliability, and versatility made it a standout engine for the era.
How much horsepower does a Ford 352 have?
This series of engines usually weighed over 650 lb (295 kg). In 1960 Ford created a high-performance version of the 352 rated at 360 horsepower (270 kW) it featured an aluminum intake manifold, Holley 4100 4-barrel carburetor, cast iron header-style exhaust manifolds, 10.5:1 compression ratio, and solid lifters.
What was Ford's most reliable engine?
Reaching over 500,000 miles on average, the 6.7 Power Stroke engine is the best in reliability, with some Ford enthusiasts reporting the success of their diesel engines at 1.3 million miles.
How much horsepower does a 1960 Ford Thunderbird have?
300 HORSEPOWER
THE SQUARE BIRDS HAVE A VERY UNIQE LOOK, SPORTY INTERIORS AND A 300 HORSEPOWER MOTOR.
What was Ford's most powerful engine?
Venomous strike: The all-new 2020 Mustang Shelby GT500 will produce 760 horsepower and 625 lb. -ft. of torque, making it the most powerful street-legal Ford ever – with the most power- and torque-dense supercharged production V8 engine in the world.
How much HP can you get out of a 352?
050" factory cam) and make 260 hp with just a header/intake/carb swap, so 400 hp isn't out of the realm of possibility with a 352 and some good parts. This little 352 made 430 hp with unported factory heads, a Police Interceptor intake, with pump gas compression ratio.
Is the Ford 352 a good engine?
The 352, as Stan Hanks notes, is an FE (Ford Edsel) design and is a great engine. I have owned several FE engines including 2 of the 352 and 5 in the 390cid. They are resilient torque producers with good reliability. I would happily own others in this series.
What is a 1960 Thunderbird worth today?
Typically, you can expect to pay around $22,925 for a 1960 Ford Thunderbird in good condition with average spec. The highest selling price of a 1960 Ford Thunderbird at auction over the last three years was $82,500.
What years did Ford use the 352 engine?
Ford 352 CID V-8: 1958 – 1966. The 352 was Introduced in 1958 as part of the “Interceptor” (high performance) line of FE engines. The 352 has an actual displacement of 351.9 CID. It is a stroked 332 with 3.50″ stroke while retaining the 332's 4.00″ bore.
Can you get 500HP out of a 350?
You “can” get 500HP out of a 350 BUT because it is a small cubic inch engine it IS going to be peaky and won't have much torque.
Did Ford make a 352 V8?
The 352 was Introduced in 1958 as part of the “Interceptor” (high performance) line of FE engines. The 352 has an actual displacement of 351.9 CID. It is a stroked 332 with 3.50″ stroke while retaining the 332's 4.00″ bore.
