How much horsepower does a 1964 383 Dodge have?
The 1964 Dodge 383 engine was a powerful and iconic powerplant that delivered impressive performance for its time. According to the available information, the 1964 Dodge 383 engine produced around 330 horsepower.
Exploring the Specifications of the 1964 Dodge 383 Engine
The 1964 Dodge 383 engine was a V8 powerplant that was part of Dodge's legendary B-series engine lineup. It had a displacement of 383 cubic inches (6.3 liters) and featured a cast-iron block and cylinder heads. The engine was known for its robust construction and impressive power output, making it a popular choice among performance enthusiasts of the era.
Horsepower and Torque Figures
According to the information gathered from various sources, the 1964 Dodge 383 engine produced around 330 horsepower at 4,800 rpm. 1 2 This was a significant amount of power for the time, as many other engines of the era were producing significantly less. The engine also delivered 425 lb-ft of torque at 3,200 rpm, providing ample low-end grunt and acceleration.
Factors Influencing the 383's Performance
- Displacement: The large 383 cubic inch displacement allowed the engine to produce substantial power and torque.
- Cylinder Head Design: The engine's cylinder heads were designed to optimize airflow and combustion efficiency, contributing to the impressive power output.
- Compression Ratio: The 383 engine had a compression ratio of 10.1:1, which was relatively high for the time and helped boost power.
- Carburetion: The engine was typically equipped with a four-barrel carburetor, further enhancing its performance capabilities.
The combination of the 383's large displacement, efficient cylinder head design, and high compression ratio, along with the four-barrel carburetor, resulted in the engine's impressive power output that made it a favorite among Dodge enthusiasts in the 1960s.
Conclusion
The 1964 Dodge 383 engine was a true powerhouse of its era, delivering around 330 horsepower and 425 lb-ft of torque. Its robust construction, large displacement, and advanced design features made it a standout performer in the muscle car era, cementing its place in automotive history.
Is a 383 Mopar a big block or small block?
The Mopar 383 uses a wildly different bore and stroke: 4.310 bore with a 3.375 stroke. Mopar aficionados will note that the bore is bigger than stock, this particular big-block is 0.60-over, which means a total displacement of 394ci.
Is a 383 better than a 350?
The biggest advantage to putting a crankshaft from a Chevy 400 into a 350 block to produce 383 cubic inches is that more displacement equals more power. Also, the longer crank throw produces more downward thrust, which translates into torque.
What is the difference between a 350 and a 383?
The biggest advantage to putting a crankshaft from a Chevy 400 into a 350 block to produce 383 cubic inches is that more displacement equals more power. Also, the longer crank throw produces more downward thrust, which translates into torque.
How much HP does a Dodge 383 have?
The affordable and underrated 383 gets a huge boost in the arm by Muscle Motors—to the tune of 559 hp and 611 lb-ft. The small engine in any car manufacturer's portfolio has a hard time getting any respect, and the same is true within the Chrysler brand.
What's so special about a 383 stroker?
The increased piston speed and long-volume stroke also allows the fuel to stay better atomized due to the change in intake pulses and an increased air speed over the valve. Performance Upgrades: Performance parts are manufactured to flow more air, rendering more power. The 383 will flow more air with less engine rpm.
Why was the Mopar 340 so good?
A high-rise dual-plane intake worked with an updated carburetor, while a new steel crank was also introduced. High-performance heads and cams and an enhanced oil pump rounded off the upgrades, which had a marked effect on the power output of Chrysler's small-block V8.
How much horsepower can you get out of a 383 Magnum?
We had only one question: How much power would it make? From 1968-1970, the 383 Magnum was rated at 335 hp, although Mopar fans who remember these free-revving engines would compare seat-of-the-pants pull to the 440.
How much horsepower does a 383 make?
383 Chevy Long Block
This 383 Chevy Stroker Engine pumps out 500 HP. It is designed for street performance with the occasional trip to the strip.
How does a 383 stroker compared to a 350?
Why A Stroker, You Ask? The biggest advantage to putting a crankshaft from a Chevy 400 into a 350 block to produce 383 cubic inches is that more displacement equals more power. Also, the longer crank throw produces more downward thrust, which translates into torque.
Why is the 383 stroker so good?
Efficiency: The stroker has an increased piston speed because of the longer stroke. The stroke increases the rod main's centerline diameter. The rod and piston have to travel in a larger diameter in the same engine rpm.
