How much horsepower does a 1993 Toyota Paseo have?
The 1993 Toyota Paseo, powered by a 1.5-liter 4A-FE engine, typically produced about 105 horsepower (SAE net) in the US market.
Horsepower figures for the Paseo vary by market and by how output is measured. Some regions and older listings report around 100–103 horsepower depending on whether the rating is SAE net or a different standard, as well as emissions equipment and tuning for that year.
Engine specifications and performance
The Paseo relied on Toyota’s 1.5-liter 4A-FE inline-four engine, a member of the A-series family. In US-spec models for the early 1990s, it delivered roughly 105 horsepower (SAE net) at about 6,000 rpm and around 100 lb-ft of torque at roughly 4,000 rpm. The engine was paired with either a five-speed manual transmission or a four-speed automatic, depending on trim. This combination gave the Paseo nimble urban performance with mileage-minded efficiency.
Market variations
Because horsepower ratings can differ by market and by test method, numbers outside the United States or under different emission standards may show slight deviations. In some regions or older literature, you may see figures closer to 100–103 hp (often cited as gross or different net standards). Torque figures generally hover around 100 lb-ft, with small variances by drivetrain and spec.
The following figures summarize the engine output and how it varied across markets and measurement methods.
- Engine: 1.5-liter 4A-FE inline-four
- Power: ~105 horsepower (SAE net) in US-market models
- Torque: ~100 lb-ft (136 Nm)
- Redline: around 6,000 rpm
- Transmissions: 5-speed manual or 4-speed automatic depending on trim
These figures reflect common 1993 Paseo configurations and are intended as a practical reference for buyers, restorers, and enthusiasts.
Notes on measurement and context
horsepower figures from the early 1990s can differ depending on whether the rating is gross horsepower or SAE net horsepower. In the US, the 1993 Paseo is typically listed with SAE net horsepower, which accounts for the power loss of accessories and the exhaust. In other regions, the same engine could be reported with different numbers due to local testing standards and emission controls. When comparing, consider both horsepower and torque, plus factors like vehicle weight and gearing, which influence real-world acceleration more than peak horsepower alone.
Summary
In brief: the 1993 Toyota Paseo typically delivers about 105 horsepower (SAE net) from its 1.5-liter 4A-FE engine, with around 100 lb-ft of torque. Expect small variations by market and method of measurement, but 105 hp is the standard reference for common US documentation.
