How much horsepower does a 2000 Ford f150 4.6 have?
The 2000 Ford F-150 with the 4.6-liter V8 is rated at about 260 horsepower (SAE net), with torque around 275 lb-ft. This official figure reflects Ford’s rating for that model year and the performance you could expect from a 4.6L V8-powered F-150 at the time.
Context: the 4.6L V8 in the 2000 F-150
The 2000 F-150 used the modular 4.6L V8 in a two-valve SOHC configuration. This engine is part of Ford’s modular family and was paired with the transmissions commonly found in the truck’s lineup. In 2000, this was the standard setup for buyers seeking a balance of power and practicality in a full-size pickup.
Official horsepower and how it was measured
Horsepower ratings for that year were SAE net figures, which reflect power after accessory loads and drivetrain losses are accounted for. Ford published 260 hp for the 4.6L V8 in the 2000 F-150, with torque around 275 lb-ft, though exact numbers could vary slightly depending on equipment, emissions controls, and gearing.
The following items summarize the factory figures and related specs for the 2000 F-150’s 4.6L V8:
- The 4.6L V8 (2-valve SOHC) in the 2000 F-150: 260 horsepower (SAE net).
- Torque: typically around 275 lb-ft, with slight variation by configuration.
- Note: There were no 3-valve 4.6L options in the 2000 model year; those variants appeared later in the lineup.
In other words, the official number is 260 hp, and the real-world feel can vary with wear, payload, and drivetrain specifics.
How this translates to real-world performance
With 260 hp and about 275 lb-ft of torque, the 2000 F-150’s 4.6L V8 offered solid acceleration for a full-size pickup of its era, especially when paired with the standard transmissions and rear- or four-wheel-drive configurations available at the time. Towing capacity and payload also factor into how that horsepower translates to everyday performance.
Verifying your particular truck
To confirm the exact horsepower for your vehicle, consult the original window sticker or build sheet. The VIN can be decoded to retrieve the engine specification, and a dynamometer test can provide a current measurement, especially if modifications or wear have affected output.
Summary
For the 2000 Ford F-150 equipped with the 4.6-liter V8, the factory rating is 260 horsepower (SAE net) with around 275 lb-ft of torque. This reflects the two-valve SOHC configuration used that year and provides a baseline for performance comparisons with other model years and engine variants in the F-Series lineup. Real-world performance will depend on condition, configuration, and payload.
