How much horsepower does a 2011 Ford Crown Victoria Police Interceptor have?
The 2011 Ford Crown Victoria Police Interceptor is rated at 250 horsepower from its 4.6-liter V8 engine.
This figure comes from Ford’s SAE net rating for the police package, reflecting the engine’s output in patrol-duty configuration. The CVPI emphasizes torque and durability for pursuit and cruiser use, rather than peak-revving horsepower.
Powertrain overview
The Crown Victoria Police Interceptor relies on Ford’s 4.6-liter Modular V8, a durable, V8 design common to the era's Crown Victoria lineup. In police specification, it delivers about 250 hp and roughly 287 lb-ft of torque, paired with a robust four-speed automatic transmission designed for long patrol duty cycles.
Key specifications for the powertrain include:
- Engine: 4.6-liter Modular V8 (SOHC)
- Horsepower: 250 hp (SAE net)
- Torque: Approximately 287 lb-ft
- Transmission: 4-speed automatic (Ford 4R70W family)
- Drive: Rear-wheel drive
In practice, the CVPI’s horsepower supports solid urban and highway performance, especially when combined with its gearing, cooling package, and reinforced suspension. Real-world acceleration and top speed are influenced by the vehicle’s cruiser equipment, fuel, and maintenance state.
Context for patrol use
Police packages prioritize reliability, low-end torque, and sustained performance over sheer horsepower. The CVPI’s 250 hp figure is modest by modern standards, but it is coupled with a weighty chassis, substantial torque, and a proven drivetrain designed to endure long shifts, frequent stops, and high-speed pursuit scenarios.
Summary
Overall, the 2011 Ford Crown Victoria Police Interceptor delivers about 250 horsepower from its 4.6-liter V8, with strong torque to support patrol performance. This setup reflects Ford’s emphasis on durability and practical power for law enforcement use rather than high-revving speed.
How fast is a Crown Vic Police Interceptor?
The top speed of a Ford Crown Victoria Police Interceptor varies by model year, but is typically between 120-130 mph, with later models (2006-2011) electronically limited to a slightly higher 140 mph. Earlier models had a lower top speed of around 124 mph. Factors like axle ratio also affect top speed and acceleration, with a 3.27 ratio allowing for a higher top speed than a 3.55 ratio.
- Early models: Approximately 124 mph.
- Later models (2006-2011): Electronically limited to 140 mph.
- Axle ratio impact:
- 3.27:1 ratio: Can reach up to 129 mph.
- 3.55:1 ratio: Limited to 119 mph.
How much horsepower does a 3.7 Police Interceptor have?
300 horsepower
The 3.7 is a little over 300 horsepower. That's more than the Crown Vic it replaced a 3.0 twin turbo is 400 horsepower.
How much HP does a 4.6 Police Interceptor have?
Engine and drivetrain
The CVPI is powered by a 4.6 liter V8 engine producing 250 hp (186 kW) and 297 ft·lb (403 N·m) of torque that is mated to a four-speed automatic transmission.
How much horsepower does a 2011 Crown Victoria Police Interceptor have?
250.5 hp
The 2004–2011 CVPI is rated for 186.8 kW (254 PS; 250.5 hp) at 4,900 rpm.
