How much horsepower does a Honda City 1.3 have?
Typically around 100 horsepower for the common 1.3-liter i-VTEC version, though exact output varies by model year and market.
The Honda City has used several 1.3-liter engines across generations and regions. While the best-known configuration is the i-VTEC 1.3, older or regional variants (such as non-VTEC or i-DSI versions) can produce less power. The following provides a concise look at the main 1.3-liter outputs you might encounter, with notes on market differences.
Engine variants and horsepower outputs
Below are the typical horsepower figures associated with the main 1.3-liter configurations used in Honda City models across generations and markets. Values are approximate and can vary with tuning, emissions equipment, and transmission choice.
- 1.3-liter i-VTEC (common in many markets): about 100 PS (roughly 99 hp) at around 6,000 rpm; torque approximately 127 Nm at about 4,600 rpm.
- 1.3-liter i-DSI or non-VTEC variants: typically around 70–90 hp depending on market and tuning.
- Older or regional 1.3 variants (pre-i-VTEC or carbureted): roughly 60–85 hp, depending on era and specification.
Note: The Honda City lineup has evolved over time, and some regions offer different engine sizes in newer generations. The figures above focus on the 1.3-liter variants and are meant as general reference rather than exact specifications for every country or model year.
Country and generation specifics
India and Southeast Asia
In several Southeast Asian markets, the City historically used a 1.3-liter engine in earlier models, with i-VTEC versions delivering around 100 PS in later iterations. Transmission choices (manual or CVT) can influence practical performance, but peak horsepower typically aligns with the 100 PS figure for the 1.3 i-VTEC variant.
Europe and Japan
European and Japanese markets have seen both i-VTEC and i-DSI 1.3 variants. In these regions, 1.3 i-VTEC versions often align with about 100 PS, while some i-DSI configurations hover in the lower end of the range (roughly 70–90 hp) due to stricter emissions tuning and market-specific gearing.
Real-world considerations
Power figures are measured under standardized conditions; real-world results can differ due to vehicle weight, aerodynamics, transmission type, maintenance, and fuel quality. For a precise figure on a specific car, check the owner's manual, VIN-based specifications, or the manufacturer’s brochure for that exact year and market.
In summary, the Honda City 1.3 is most often cited around 100 horsepower for the popular i-VTEC configuration, with variations down to roughly 70–90 horsepower for other 1.3-liter variants. Always verify the exact specification for your vehicle based on its year and region.
Summary: The typical horsepower for a Honda City 1.3 is about 100 hp in the i-VTEC version, with variations across older or non-VTEC 1.3 engines that can produce roughly 70–90 hp depending on market and generation.
How much horsepower does a Honda City 1.3 engine have?
The City was available with a range of four-cylinder engines include a 1.3-litre engine producing 73 kW (98 hp) at 6,000 rpm, a 1.5-litre engine L15A7 putting out 120 PS (88 kW) (118 hp), which both are available in manual and automatic transmissions with a paddle shifters variant (India, Malaysia, Thailand and ...
Is 1.3 i-VTEC suitable for City driving?
It is a great car for city use.It is powerfull and I would highly recommend that you buy tThe Style Is Good Comfort Is Very Good The Fuel Econmy Is Good My Car Gives 12.7km per litStylish Look Smooth Drive Fuel Efficient 15Km City ,17KM Long Perfect Road Grip Comfortabl ...
What is the mileage of a Honda City 1.3 Type 2?
The City 2020-2023 mileage is 18.3 to 24.1 kmpl. The Manual Petrol variant has a mileage of 18.6 kmpl. The Automatic Petrol variant has a mileage of 18.3 kmpl. The Manual Diesel variant has a mileage of 24.1 kmpl.
How much horsepower does a 1.3 i-VTEC produce?
A 1.3-litre i-VTEC produces 100 PS (99 hp; 74 kW) at 6,000 rpm and 127 N⋅m (13.0 kg⋅m; 93.7 lb⋅ft) at 4,800 rpm.
