How much is a brake job for a Chevy Silverado 1500?
A brake job on a Chevy Silverado 1500 typically costs roughly $150–$300 per axle for pads only, and about $300–$550 per axle if you replace both pads and rotors. If calipers or other components are needed, the price can rise to around $450–$900 per axle. For a full four-wheel service, you’re generally looking at about $600–$1,800 in total, depending on parts and local labor rates.
Brake service costs vary based on year, trim, rotor size, pad material (ceramic vs semi-metallic), and whether your shop is using OEM or aftermarket parts. The Silverado 1500 uses front and rear disc brakes with ABS, and the right choice of pads and rotors can influence both performance and price. The following sections break down typical costs and the reasons behind them.
What a brake job on a Silverado 1500 typically includes
Most brake services begin with a thorough inspection of pad thickness, rotor condition, caliper function, brake lines, and fluid. If rotors are below specification or heavily scored, they are usually replaced; if they’re within tolerance, some shops will resurfaced them. Calipers are replaced if seized, leaking, or causing uneven wear. A complete service may also include a brake fluid flush, replacement of anti-rattle clips and other hardware, and a test drive to confirm proper operation.
Typical cost ranges
Below are common price ranges you might see quoted for a Silverado 1500 brake service, broken down by whether you replace pads only or pads and rotors. Prices are per axle and include parts and labor; actual quotes can vary by location and shop.
- Pads only (one axle): $150–$300
- Pads only (two axles): $300–$600
- Pads + rotors (one axle): $300–$550
- Pads + rotors (two axles): $600–$1,100
- Calipers or other parts required (per axle, in addition to pads/rotors): $150–$350
Prices can be higher for specialty pads (ceramic or performance materials) or for premium rotors, and lower for basic aftermarket parts. Always confirm what is included in the quote (fluid flush, taxes, disposal fees, and whether rotors are resurfaced or replaced) to avoid surprises.
Factors that influence price
Several factors influence the final cost of a brake job on a Silverado 1500. Understanding them can help you compare quotes and avoid overpaying.
- Parts quality: OEM vs aftermarket pads and rotors; ceramic pads typically cost more but may last longer and be quieter.
- Rotor treatment: resurfacing vs replacement; resurfacing is cheaper but not always possible if rotors are too worn or damaged.
- Calipers and hardware: seized or leaking calipers add substantial cost; replacement may be necessary.
- Labor rates: regional differences, shop type (dealer, independent, quick-lube), and the local cost of living affect price.
- Vehicle specifics: rotor size, availability of parts for older vs newer Silverado 1500 generations, and any model-year quirks.
- Additional services: brake fluid flush, ABS/traction control checks, line inspections, and new pads/release hardware can add to the bill.
To get the best value, request a written estimate that itemizes parts, labor, and any ancillary services, and ask whether rotors will be resurfaced or replaced if they are marginal.
Saving money and getting a fair quote
Tips to manage costs without compromising safety:
- Shop around and compare at least three written estimates from reputable shops in your area.
- Ask what parts are being used (OEM vs aftermarket) and whether rotors will be resurfaced or replaced.
- Consider timing your brake service with other maintenance to reduce labor charges if your vehicle is already at the shop.
- Inquire about financing or promotions, and see if multi-axle service is discounted.
Being informed helps you balance performance, longevity, and price when planning a brake job on your Silverado 1500.
Summary
Brake services for the Chevy Silverado 1500 typically cost between $150 and $300 per axle for pads alone, and $300 to $550 per axle when replacing pads and rotors. Calipers or other components can push costs higher. For both axles, a full four-wheel brake job often falls in the $600 to $1,800 range, depending on parts and local labor rates. Prices vary by year/model, pad type, rotor condition, and regional labor costs. Always obtain a detailed written estimate and clarify what’s included to ensure you’re comparing like-for-like quotes.
How long do brakes last on a Silverado 1500?
30,000 to 70,000 miles
But speaking generally, your Chevy Silverado's brake pads should last anywhere from 30,000 to 70,000 miles. So even if you don't notice any of the warning signs above, by the time you hit that 70,000-mile mark, you should probably bring your truck in for an inspection anyways.
How much does a brake job cost on a Chevy Silverado 1500?
The average cost for a Chevrolet Silverado 1500 Brake Pad Replacement is between $404 and $478. Labor costs are estimated between $159 and $233 while parts are typically priced around $245.
How much are brake pads for all four wheels?
Brake pad replacement typically costs $150-$400 per axle at most shops. The price varies based on your vehicle type, the quality of brake pads you choose, and local labor rates. Luxury or performance vehicles can cost $300-$800+ per axle due to specialized parts.
How much does a full brake job cost on a truck?
The Brake Job Cost Breakdown: Parts and Labor
For a larger SUV or truck, that cost can easily be between $300 and $600. Labor Costs: With a typical shop rate of $120 per hour and a job time of 2 hours, you can expect to pay around $240 in labor for one axle.
