How much is a brake job for a Silverado?
In short, a brake job on a Silverado typically runs about $150–$300 per axle if you replace only the pads, $300–$600 per axle if you replace pads and rotors, and $600–$1,200 total for a full four-wheel brake service on a Silverado 1500. Heavy‑duty 2500/3500 models can be higher, and regional labor rates can push prices up or down.
What determines the price
Several factors influence the final bill, including the scope of the service, the model of Silverado, the quality of parts, and local labor rates. Below are the main considerations that drive cost.
Vehicle variant and rotor size
HD models (2500/3500) use larger rotors and heavier braking systems, which typically raises both parts and labor costs compared with the lighter-duty Silverado 1500.
Labor rates and geographic location
Labor charges vary widely by region and shop. Urban areas or dealership service bays tend to be more expensive than shops in smaller towns. Always request a written estimate with labor and parts broken out.
Before presenting a detailed price breakdown, note that some shops offer rotor resurfacing as a cheaper alternative to rotor replacement if the rotors are still within spec. The choice between resurfacing and replacing rotors can significantly affect the total cost.
Below are typical price ranges for the most common brake services performed on Silverado pickups in the United States. Prices assume standard aftermarket parts and average local labor rates; your costs may vary by location and vendor.
- Pads-only replacement (per axle, front or rear): $150–$300
- Pads + rotors replacement (per axle): $300–$600
- Full brake service on a Silverado 1500 (both axles): $600–$1,100
- Full brake service on a Silverado 2500/3500 (HD, both axles): $900–$2,000
Concluding note: final costs will reflect rotor resurfacing vs rotor replacement, additional items (calipers, brake fluid flush, pads with extra-thick coatings, disposal fees, and taxes), and any manufacturer-specific requirements. Always obtain a written, itemized estimate before approving work.
What to expect in practice
Most customers paying for a typical front or rear brake job on a Silverado are looking at options between pads-only versus pads with rotors. If your vehicle has high mileage, warped rotors, or sticking calipers, the price will trend toward the higher end of the ranges above. If you drive a Silverado 1500 in a mid-range market, plan for roughly $600–$1,200 for a full two-axle service, whereas HD models can exceed that range.
Getting an accurate quote
To avoid surprise costs, shop around and request quotes that break out parts, labor, and any shop fees. Ask whether rotors are included, if resurfacing is offered, whether a brake fluid flush is needed or recommended, and whether warranties on parts and labor are included. Bringing your vehicle to a trusted local shop for a hands-on inspection can help determine whether rotor replacement is necessary or if resurfacing suffices.
Summary
Brake-job pricing for a Silverado varies with model (1500 vs. 2500/3500), scope (pads only vs. pads and rotors vs. full four-wheel service), and local labor rates. Typical ranges are roughly $150–$300 per axle for pads-only, $300–$600 per axle for pads+rotors, and $600–$1,200 for a full four-wheel job on a Silverado 1500, with HD models higher. Always obtain an itemized estimate and consider rotor resurfacing as a cheaper alternative when appropriate.
How much does a brake job cost on a Chevy Silverado?
Replacing the brakes on a Chevy Silverado can cost anywhere from $100 to $300 per axle for just the pads, but a complete job including rotors will typically be between $200 and $800 per axle, depending on the parts needed and labor. Costs vary based on your Silverado's specific model year, the extent of the damage, and whether you use OEM or aftermarket parts.
Cost breakdown
- Brake pads only: Replacing only the pads can cost around $100 to $300 per axle.
- Full replacement (pads and rotors): A full replacement of pads and rotors is more expensive, averaging between $200 and $800 per axle.
- Factors influencing cost:
- Model Year: Newer models may have more complex systems or require specific parts, which can increase the price.
- Parts: The choice between original equipment manufacturer (OEM) parts versus aftermarket parts will impact the total cost.
- Additional repairs: If the calipers or other components are damaged, the price will be higher.
- Labor: If the job is done at a dealership or a specialized shop, labor costs will be factored into the final price.
- DIY vs. Professional: If you are a DIYer with the right tools and knowledge, you can save money on labor, but it's important to note that complex issues like seized components in rust belt regions can add unexpected difficulties and costs.
- Rear-end specific issues: Silverado models with electronic parking brakes require additional steps for rear brake replacement, which may involve using a special scan tool to put the brakes in "service mode" and an OBD2 scanner to reset the system afterward.
How much does a full brake job cost on a truck?
The Brake Job Cost Breakdown: Parts and Labor
For a larger SUV or truck, that cost can easily be between $300 and $600. Labor Costs: With a typical shop rate of $120 per hour and a job time of 2 hours, you can expect to pay around $240 in labor for one axle.
How much are brake pads for all four wheels?
Brake pad replacement typically costs $150-$400 per axle at most shops. The price varies based on your vehicle type, the quality of brake pads you choose, and local labor rates. Luxury or performance vehicles can cost $300-$800+ per axle due to specialized parts.
How long do brakes last on a Silverado 1500?
30,000 to 70,000 miles
But speaking generally, your Chevy Silverado's brake pads should last anywhere from 30,000 to 70,000 miles. So even if you don't notice any of the warning signs above, by the time you hit that 70,000-mile mark, you should probably bring your truck in for an inspection anyways.
