How much is a brake job on a Chevy Silverado?
Typically, you’ll pay about $300 to $800 per axle at an independent shop for a standard brake service on a Chevy Silverado. Pads-only jobs skew toward the lower end, while replacing rotors (and possibly calipers) pushes the price higher. For both axles, expect roughly $600 to $1,600, with dealership quotes often higher.
Prices vary by Silverado model (1500, 2500HD, 3500HD), pad material (ceramic vs semi-metallic), rotor condition, whether rotors are resurfaced or replaced, caliper needs, and regional labor rates. The following breakdowns reflect typical ranges in 2025 and can help you budget and compare quotes.
What affects the price
The final brake-service cost is driven by parts choices, labor time, and the truck’s specific configuration. Heavier-duty Silverado models use larger rotors and calipers, which can raise both parts and labor costs. Regional labor rates and the shop’s pricing policy (pads included, fluids, and long-term warranties) also matter.
Common cost drivers and options
Brake jobs range from a pads-only exchange to a full pads-and-rotors replacement, with calipers and fluid service as optional add-ons. Each option changes the price and the expected stopping performance.
Before listing typical price ranges, note that front brakes on a Silverado are typically more substantial than the rear, and a two-axle service doubles the per-axle cost. Actual quotes depend on the exact parts used and the shop’s labor rate.
Typical cost ranges for common brake-job scenarios on a Silverado
- Pads-only replacement (per axle): about $160–$320
- Pads and rotors (per axle): about $270–$520
- Caliper replacement (per axle, if needed, includes part and labor): about $350–$800
- Two-axle service (pads and rotors on both axles): about $540–$1,040
- Two-axle service with calipers replaced on one or both axles: about $700–$1,600
Prices can vary widely by region and shop, and dealership quotes are typically higher than independent repair shops. Always ask for a written estimate that breaks down parts and labor.
Cost by Silverado variant
Prices differ by whether you’re driving a Silverado 1500 (half-ton), 2500HD, or 3500HD, due to rotor size, caliper weight, and required labor. The ranges below reflect typical, non-promotional estimates in 2025.
Chevy Silverado 1500 (half-ton)
Typical per-axle costs for commonly requested brake-service scenarios on the 1500:
- Pads-only: $160–$320
- Pads + rotors: $270–$520
- Caliper replacement (if needed): $350–$800
Two-axle service (pads and rotors on both ends) for the Silverado 1500 generally falls in the range of $540–$1,040, depending on parts quality and whether calipers are replaced.
Chevy Silverado 2500HD / 3500HD
Typical per-axle costs for these heavier-duty variants:
- Pads-only: $180–$350
- Pads + rotors: $290–$560
- Caliper replacement (per axle): $400–$900
Two-axle service for 2500HD/3500HD with pads and rotors on both axles generally ranges from $720 to $1,120, with higher end if calipers are replaced on multiple wheels.
What to do to save money or get a reliable quote
To make sure you get a fair price and solid workmanship, consider these tips before approving a brake-job quote.
- Obtain written estimates from at least two independent shops and compare parts (pads: ceramic vs semi-metallic; rotors: new vs resurfaced).
- Ask which parts are included in the quoted price and whether rotor resurfacing is an option.
- Check if the price includes brake-fluid replacement, brake-line flushing, and a new sensor or wear indicators if applicable.
- Inspect the rotors for scoring, grooves, and thickness; heavy rotor wear may justify replacing rotors rather than resurfacing.
- Ask about warranties on parts and labor, and whether the shop performs a basic brake-system diagnostic to identify sticking calipers or worn hardware.
Being informed can help you avoid surprises and ensure the job meets safety standards for your Silverado.
Summary
Brake-job costs for a Chevy Silverado vary by model, parts choice, and region. Pads-only service is the least expensive, while full pads-and-rotors replacement—or caliper work—adds significantly to the bill. As a rough guide, expect per-axle ranges of roughly $160–$320 (pads only) up to $270–$520 (pads and rotors), with heavier-duties variants and two-axle jobs typically pushing total costs upward. Get multiple written estimates, understand what’s included, and choose quality parts to ensure reliable braking performance on your Silverado.
How much is a brake job for a Chevy Silverado?
2020 Chevrolet Silverado 1500 brake pads replacement, which includes components and labor, can cost anywhere between $150 and $300 per axle depending on the type of brake pads required and the extent of the damage your formerly worn down pads have caused to the other components of your car such as the rotors.
How long do brake pads last on a Chevy Silverado 1500?
30,000 to 70,000 miles
As you might expect, your driving habits and how often you're transporting heavy loads will have a major impact on how often you'll need to be replacing your brake pads. But speaking generally, your Chevy Silverado's brake pads should last anywhere from 30,000 to 70,000 miles.
How much are brake pads for a Chevy Silverado?
Advance Auto Parts carries 133 Brake Pads and Shoes from top brands with prices ranging from $13.99 to $178.99. Beyond great prices, we stock trusted brands manufacturing all types of Brake Pads and Shoes for your Chevrolet Silverado 1500.
How much does a full brake job cost on a truck?
The Brake Job Cost Breakdown: Parts and Labor
For a larger SUV or truck, that cost can easily be between $300 and $600. Labor Costs: With a typical shop rate of $120 per hour and a job time of 2 hours, you can expect to pay around $240 in labor for one axle.
