How much oil does a 14 Durango 3.6 take?
The 2014 Dodge Durango 3.6 takes 6 quarts of oil. This full-size SUV is equipped with a 3.6-liter V6 engine that requires a specific oil capacity and type to ensure proper lubrication and performance.
Detailed Oil Change Information for the 2014 Dodge Durango 3.6
The 2014 Dodge Durango 3.6 has a recommended oil capacity of 6 quarts. This includes the oil filter, which holds approximately 1 quart of oil. When performing an oil change, you'll need to replace all 6 quarts of oil to ensure the engine is properly lubricated.
The Durango 3.6 engine is designed to use the following oil specifications:
- Oil Type: 5W-20 synthetic blend or full synthetic motor oil
- Oil Filter: Mopar or equivalent oil filter
It's important to use the recommended oil type and change the oil and filter at the intervals specified in your owner's manual to maintain the Durango's engine health and performance.
Tips for Changing the Oil in a 2014 Dodge Durango 3.6
- Park the Durango on a level surface and apply the parking brake.
- Allow the engine to cool completely before beginning the oil change.
- Locate the oil drain plug, usually on the bottom of the oil pan, and place a drain pan underneath.
- Unscrew the drain plug and allow the old oil to fully drain.
- Once drained, replace the drain plug and tighten it securely.
- Locate the oil filter, typically accessible from the top of the engine, and use an oil filter wrench to remove it.
- Apply a thin coat of new oil to the gasket of the new oil filter, then screw it on until secure.
- Unscrew the oil fill cap and pour in 6 quarts of the recommended 5W-20 oil.
- Replace the oil fill cap and start the engine, checking for any leaks.
- Allow the engine to run for a few minutes, then check the oil level and top up if necessary.
Following these steps will ensure your 2014 Dodge Durango 3.6 is properly serviced with the correct amount and type of oil, keeping your engine running smoothly.
What kind of oil does a Dodge Durango 3.6 take?
Oil Grade: SEO11
After refill check oil level.
How much oil does my 3.6 liter engine take?
The 3.6L Pentastar Upgrade engine typically uses a smaller oil pan for most applications versus the 3.6L Pentastar Classic, resulting in an engine oil capacity of five (5) quarts for the Upgrade engine.
How much oil does a 2014 Dodge Durango 3.6 L take?
6.0 qt.
ENGINE: 3.6-LITRE DOHC V6
@ 4,800 rpm Max. Engine Speed 6,400 rpm (electronically limited) Fuel Requirement Unleaded regular, 87 octane (R + M)/2 Oil Capacity 5.7 litres (6.0 qt.)
How much oil does a GM 3.6 L V6 take?
6 quarts
The GMC Acadia oil capacity is 5 quarts for the 2.0L engine and 6 quarts for the 3.6L V6. You'll need to know the GMC Acadia oil capacity when you purchase the lubricant for doing your own oil changes in Lynnfield. Consult with your owner's manual to see what kind of oil GMC recommends for your specific SUV.
What is the specs of the 2014 Dodge Durango V6?
Mechanical
| All Wheel Drive | |
| V6 Cylinder Engine | |
| Engine Type | Regular Unleaded V-6 |
| Displacement | 3.6 L/220 |
| Horsepower (Net @ RPM) | 290 @ 6400 |
Is Dodge Durango V6 fast?
The 2022 Dodge Durango has a projected 120 mile per hour top speed. With the V8 Hemi 5.7-liter and the 3.6L V6 Pentastar powerplants of the Dodge Durango, the maximum speed is 120 miles per hour. But from its most powerful powerplant, the 6.4L V8, the top speed is an estimated 160 miles per hour.
What does SXT stand for in Durango?
Standard eXTra
SXT stands for "Standard eXTra". It is the base trim option for the Challenger, Charger, and Durango. Despite being the entry-level trim, the Standard eXTra offers incredible performance and technology. For example, a 2023 Dodge Challenger SXT has a 303-horsepower V-6 engine, Uconnect 4, and a leather steering wheel.
Is the Dodge 3.6 a good engine?
The overall reliability of the 3.6 Liter Pentastar V6 engine is above average and generally considered to be good. The engine has been used in various vehicles for over a decade and has proven to be reliable in most cases.
How many quarts of oil does a 2014 3.6 L take?
5.9 quarts
5.9 quarts (with filter).
How much horsepower does a 3.6 L V6 Durango engine have?
295 horsepower
3.6L PENTASTAR® V6 ENGINE
This V6 pushes 295 horsepower and 260 pound-feet of torque with the eight-speed automatic transmission. The 3.6L Pentastar® V6 can tow up to 6,200 pounds( Disclosure2) having a manufacturer's estimated 26 highway mpg( Disclosure4).
