How much oil does a 1.4 L engine take?
Approximately 3.5–4.5 liters of engine oil are typically required for a full change on a 1.4 L engine, including the oil filter; the exact amount depends on the engine family and sump design.
Understanding the variability
Oil capacity varies widely among 1.4 L engines, spanning natural aspiration to turbocharged and direct-injected designs. The exact capacity is influenced by the size of the oil pan, the volume of the oil filter, and the engine's lubrication pathways. For reliable results, always confirm the figure specified for your exact model and year.
Typical oil capacity ranges for 1.4 L engines
The following ranges cover common 1.4 L petrol engines and reflect capacities when performing a full oil change with a new filter. They are given in liters and may vary by market and model year.
- Naturally aspirated (non-turbo) 1.4 L engines: typically about 3.5 to 4.0 liters with filter.
- Turbocharged 1.4 L engines: typically about 4.0 to 4.5 liters with filter.
- Direct-injected 1.4 L engines: roughly 4.0 to 4.3 liters with filter.
- High-performance or newer 1.4 L variants: around 4.2 to 4.5 liters with filter.
These are approximate ranges and the exact capacity depends on the specific engine family, model year, and whether the oil filter is replaced. Always consult the official specification for your vehicle.
How to find the exact capacity for your car
To determine the precise oil capacity for your 1.4 L engine, use these steps:
- Check the vehicle’s owner's manual or service guide; the oil capacity is listed in lubrication or specifications sections.
- Identify your engine code (often stamped on the engine block) and look up the exact figure in the manufacturer’s database or trusted repair resources.
- Contact a dealership or the manufacturer if the manual is missing or unclear.
- When performing an oil change, start with the lower end of the range for a new filter and top up after checking the dipstick.
Note that replacing the oil filter can add roughly 0.2–0.3 liters to the overall capacity, since the filter occupies space in the oil passage.
Oil checking and filling tips
- Warm the engine, shut it off, and wait a few minutes for the oil to settle before checking.
- Wipe the dipstick, reinsert fully, and read the level according to the manufacturer’s guidance (hot vs. cold specs can differ).
- Use the oil grade recommended for your engine (for example, 5W-30 or 0W-40) and avoid mixing viscosities unless advised.
- Do not overfill; if the dipstick shows you’ve exceeded the max mark, drain a small amount before starting the engine.
Summary
In short, a typical 1.4 L engine requires roughly 3.5–4.5 liters of oil for a complete change with a new filter, but the exact number varies by engine family, turbocharging, and sump design. Always verify the precise capacity from the vehicle’s official specification and use the dipstick to confirm the correct level after topping up. Keeping to the recommended oil capacity supports proper lubrication and engine longevity.
How much oil for a 1.4 L engine?
4 litres (with filter). After refill check oil level.
How many quarts of oil does a 2012 Chevy Cruze 1.4 L take?
The 2012 Chevy Cruze 1.4L engine requires 4.2 quarts of oil for an oil change with a filter. The recommended oil type is 5W-30 viscosity.
- Capacity: 4.2 quarts (with filter)
- Recommended Oil Viscosity: 5W-30
- After Refill: Always check the oil level with the dipstick after refilling to ensure the correct amount.
What kind of oil does a 2014 Chevy Cruze 1.4 L take?
The recommended oil for a 2014 Chevy Cruze 1.4L is a full synthetic 5W-30 with the GM dexos1 specification. In very cold climates, 0W-30 can also be used. The engine holds approximately 4.2 quarts of oil, including the filter.
Key specifications
- Oil type: Full synthetic
- Viscosity: 5W-30 (standard), 0W-30 (for very cold climates)
- Specification: GM dexos1
- Capacity: Approximately 4.2 quarts (with filter)
Additional tips
- Always check your owner's manual for the most accurate and specific recommendations.
- Check the oil level on a level surface after refilling to ensure it's accurate.
- Some sources recommend changing the oil filter before draining the pan to prevent old oil from entering the pan from the filter canister.
How many quarts of oil does a 2017 Chevy Cruze 1.4 L take?
The 2017 Chevy Cruze 1.4L engine requires 4.2 quarts of oil with a filter change. The recommended oil viscosity is SAE 5W-30, and it should be a full synthetic Dexos1 approved oil.
- Capacity: 4.2 quarts (with filter)
- Oil Type: Full synthetic Dexos1
- Viscosity: SAE 5W-30
