How much oil does a 2013 Toyota 86 take?
The 2013 Toyota 86, which uses the 2.0-liter FA20 engine, takes about 4.5 quarts of engine oil when you replace the filter.
In practice, this figure refers to the oil capacity with the oil filter installed, which is the standard measurement used during an oil change. The 2013 86 is the early model of the Toyota-Subaru twin, and exact capacities can vary slightly by region or maintenance procedure, so it's best to confirm with the owner's manual or service manual and to check the dipstick after filling.
Official capacity and measurement
The following figure reflects the capacity most often cited for a typical oil change with a new filter.
- Engine oil capacity (with filter): 4.5 quarts (4.3 liters)
After pouring in the oil, check the level with the dipstick and adjust as needed to reach the full mark. Do not overfill.
Summary: For a 2013 Toyota 86, plan to use about 4.5 quarts of engine oil when replacing the filter, and verify the level with the dipstick to ensure proper lubrication.
