How much oil does a 2014 Crosstrek 2.5 take?
The 2014 Subaru Crosstrek 2.5 requires 4.4 quarts (4.2 liters) of oil for a standard oil change. This includes the oil filter replacement. The specific oil type recommended by Subaru for this model is 0W-20 synthetic oil.
Detailed Oil Change Information for the 2014 Crosstrek 2.5
The 2014 Subaru Crosstrek 2.5 is equipped with a 2.5-liter, 4-cylinder BOXER engine. Subaru recommends using 0W-20 synthetic oil for this model, which helps improve fuel efficiency and engine performance.
To complete a standard oil change on the 2014 Crosstrek 2.5, you will need the following:
- 4.4 quarts (4.2 liters) of 0W-20 synthetic oil
- 1 oil filter
It's important to follow the manufacturer's recommended oil change interval, which for the 2014 Crosstrek 2.5 is every 6 months or 6,000 miles (9,600 km), whichever comes first. Proper oil maintenance is crucial for the longevity and performance of your Crosstrek's engine.
Tips for Changing the Oil in a 2014 Crosstrek 2.5
- Use the right oil type: Subaru specifically recommends 0W-20 synthetic oil for the 2014 Crosstrek 2.5. Using the wrong oil type can lead to engine damage.
- Check the oil level: After the oil change, be sure to check the dipstick to ensure the oil level is correct. Top up if necessary.
- Dispose of old oil properly: Take the used oil and filter to a recycling center or auto parts store that accepts used oil for proper disposal.
- Consider a professional oil change: If you're not comfortable performing the oil change yourself, take your Crosstrek to a qualified mechanic or dealership service center.
Following Subaru's recommended oil change guidelines and using the correct oil type will help keep your 2014 Crosstrek 2.5 running smoothly for years to come.
How much oil does a 2014 Subaru Crosstrek 2.5 take?
The 2.5L Crosstrek engine holds approximately 4.4 US quarts (4.2 liters) of oil with a filter change.
What oil does a 2014 Subaru Crosstrek take?
2014 Subaru Crosstrek Synthetic 0w-20 oil qt - SOA427V1310 - Genuine Subaru Part.
How much oil does a 2.5 L 4-cylinder Subaru engine hold?
5.1 quarts
For the 2.5L 4-cylinder engine, the capacity is 5.1 quarts; for the 3.6L 6-cylinder engine, the capacity is 6.9 quarts. Again, you'll want to check the level to make sure you don't have too much or not enough oil.
How much oil does a 2.5 L 4-cylinder engine take?
A 2.5L 4-cylinder engine typically takes between 4.5 and 5.1 quarts of oil with a filter change, but the exact amount depends on the specific vehicle make and model. Always check your owner's manual for the precise capacity and fill level, as some engines, like the Toyota Camry 2.5L, require around 4.6 quarts, while a Subaru Outback's 2.5L may take 5.1 quarts with a filter.
Example oil capacities by vehicle
- Toyota Camry 2.5L: Approximately 4.6 quarts with a filter.
- Mazda 2.5L (non-turbo): Around 4.5 quarts with a filter.
- Nissan Altima 2.5L: About 4.9 quarts with a filter.
- Subaru Outback 2.5L: Approximately 5.1 quarts with a filter.
- Ford Ranger 2.5L: Approximately 4.5 quarts with a filter.
Important considerations
- Check your owner's manual: The most accurate information will always be in your car's owner's manual, as engine designs can vary.
- Oil capacity vs. dipstick level: After filling with the specified amount, the dipstick reading may be lower than the "full" mark. It is important to add oil incrementally until the level is within the "min" and "max" marks on the dipstick to avoid overfilling.
- Add in increments: Add about 4 quarts first, let it sit for a few minutes, and then check the dipstick. Add more in small increments until it reaches the desired level.
