How much oil does a 2015 Chevy Caprice 6.0 take?
The 2015 Chevy Caprice with the 6.0-liter V8 typically requires about 6 quarts of engine oil when changing the oil with the filter installed (roughly 5.7 liters). This quantity reflects the official capacity for the 6.0L V8 used in the Caprice PPV. Exact amounts can vary slightly by build and filter type, so always verify the level with the dipstick after refilling.
Oil capacity specifics for the Caprice’s 6.0L V8
Understanding the standard oil volume helps ensure a proper fill during routine maintenance:
- Oil with filter: 6 quarts (5.7 liters)
- Oil without filter: about 5 quarts (roughly 4.7 liters)
Note: Some service data lists the precise figures as 6 quarts with a filter and around 5 quarts without. Always confirm the level using the dipstick and refer to the vehicle’s service data for your exact build.
Maintenance tips and best practices
When performing an oil change, follow GM’s general procedure: install a new filter, add the recommended amount, run the engine briefly, shut off the engine, wait a few minutes, then recheck the level with the dipstick. Use the viscosity specified in the owner’s manual (typically 5W-30 for this engine in most climates) and select a quality oil suitable for your climate and driving conditions.
Summary
For a 2015 Caprice equipped with the 6.0L V8, plan on about 6 quarts of engine oil with the filter installed (approximately 5.7 liters). Without the filter, the approximate amount is around 5 quarts. Always verify the level after topping off and follow the manual’s viscosity recommendations for your climate.
