How much oil does a 2016 Ford Explorer 3.7 take?
The 2016 Ford Explorer 3.7 takes 6 quarts of 5W-20 engine oil. This is the recommended oil capacity and type for this specific model and year of the Ford Explorer.
Detailed Answer
The 2016 Ford Explorer 3.7 is equipped with a 3.7-liter V6 engine. According to the Ford owner's manual and various automotive repair guides, the recommended oil capacity for this engine is 6 quarts. The recommended oil type is 5W-20, which is a common multi-viscosity motor oil suitable for a wide range of operating temperatures.
It's important to use the correct oil type and amount specified by the manufacturer to ensure proper lubrication and engine performance. Using the wrong oil or overfilling the engine can lead to issues such as increased oil consumption, reduced fuel economy, and potential engine damage over time.
Oil Change Procedure
To change the oil in a 2016 Ford Explorer 3.7, you'll need the following supplies:
- 6 quarts of 5W-20 engine oil
- Oil filter
- Oil drain pan
- Wrenches or sockets to remove the oil filter and drain plug
The basic steps to change the oil are:
- Park the vehicle on a level surface and apply the parking brake.
- Locate the oil drain plug, usually on the bottom of the oil pan, and place the drain pan underneath.
- Using the appropriate wrench or socket, loosen and remove the drain plug to allow the old oil to drain out.
- Once the oil has fully drained, replace the drain plug and tighten it securely.
- Locate the oil filter, typically accessible from the top or side of the engine, and use an oil filter wrench to remove it.
- Apply a thin coat of new oil to the gasket of the new oil filter, then screw it on by hand until secure.
- Unscrew the oil fill cap and pour in 6 quarts of new 5W-20 engine oil.
- Replace the oil fill cap and start the engine to circulate the new oil.
- Check the oil level using the dipstick and add more oil if necessary to bring it to the full mark.
Be sure to dispose of the old oil and filter properly, as they can be harmful to the environment if not handled correctly.
How much oil does a 3.5 l V6 Ford Explorer take?
6.0 qt
Capacities and Specifications - 3.5L Duratec
| Item | Capacity |
|---|---|
| Engine oil (with oil filter) | 6.0 qt (5.7 L) |
| Engine coolant (without trailer tow) | 13.1 qt (12.4 L) |
| Engine coolant (with trailer tow) | 13.4 qt (12.7 L) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
What kind of oil does a 3.7 L V6 take?
Capacities and Specifications - 3.7L
| Name | Specification |
|---|---|
| Recommended motor oil (U.S.): Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP | WSS-M2C945-B1 |
| Recommended Motor oil (Canada): Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 | WSS-M2C945-B1 |
How many quarts does a 3.5 V6 hold?
It's 6.1 if you do an oil and filter change, 5.8 if you do just an oil change. Most of us just put in 6 and this will get you an oil level on the high side of the dip stick high/low level marks.
What oil is recommended for a 2016 Ford Explorer?
STP Full Synthetic Engine Oil 5W-20 5 Quart.
How much oil does a Ford 3.7 V6 take?
Capacity: 6 quarts (with filter). After refill check oil level.
How much oil does a 2016 Ford Explorer v6 take?
Capacity: 6 quarts (with filter). After refill check oil level.
Is 4 quarts of oil a lot?
Well, that depends on your vehicle's engine. Many engines will take between five to six quarts, although some small four-cylinder engines may need closer to four quarts. On the other hand, bigger engines can take up to eight or nine quarts.
How many miles per gallon does a 2016 Ford Explorer engine 3.5 L V6 get?
17/24/20 mpg city
The Explorer just feels more planted and secure. The base 3.5-liter V-6 engine gets 17/24/20 mpg city/highway/combined fuel economy with front-wheel drive and 16/23/19 mpg with all-wheel drive. The 2.3-liter EcoBoost four-cylinder engine gets 19/28/22 mpg with front-wheel drive and 18/26/21 mpg with all-wheel drive.
How many quarts of oil does a 4.0 V6 hold?
5 quarts
5 quarts (with filter). When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level.
How many quarts of oil does my V6 engine hold?
Typically, engines need five to eight quarts of oil. However, the size of your engine can impact how much oil is required. For example, a 4-cylinder oil engine may require around five quarts of oil, whereas a 6-cylinder oil needs six quarts. Usually, the smaller the engine is, the less oil you'll need for your vehicle.
