How much oil does a 2017 NSX take?
The engine oil capacity for the 2017 Acura NSX is about seven quarts (roughly 6.6 liters) when performing a full oil change with the filter. This figure is widely cited in service references and owner materials, though some small variations can occur depending on the filter and measurement method.
In this article, we’ll explain the official figure, why it’s defined the way it is, and what that means for owners planning maintenance on the 2017 NSX, including practical steps to ensure a proper fill and level check.
Official capacity and what it includes
Acura’s published data for the 2017 NSX lists the engine oil capacity as approximately seven quarts (6.6 liters) with the oil filter installed. This measurement represents the total oil the engine sump can hold after a complete drain and a new filter is in place—i.e., the “with filter” capacity used during a typical oil-change service.
Notes for accuracy
Because production variations, regional service specifications, or different oil-filter part numbers can introduce small changes, owners should verify the exact capacity against the official manual for their specific vehicle and VIN. When in doubt, confirm with an Acura dealer or a qualified technician.
Practical tips for performing an oil service
Use the capacity figure as a guideline for buying oil and planning a drain-and-fill procedure. Start by warming the engine, drain the old oil completely, replace the oil filter, and then refill with the correct amount of oil. After adding oil, run the engine, shut it off, and recheck the level on the dipstick to ensure it sits within the recommended range.
Summary
For the 2017 NSX, expect to engine oil capacity to be about seven quarts (6.6 liters) with the filter installed. While this is the commonly cited figure, always consult your owner's manual for the exact specification of your VIN and follow service procedures carefully to maintain optimal lubrication for the NSX’s high-performance hybrid drivetrain.
What kind of oil does a Acura NSX take?
■Recommended Engine Oil
Acura NSX specifications require full synthetic, 0W-40 motor oil such as Ultimate Full Synthetic Motor Oil, Type 3, 0W-40, available at your authorized Acura NSX dealer.
How much oil does a 3.0 L 6 cylinder take?
A 3.0L V6 engine typically takes between 4.5 and 6.5 quarts of oil, but the exact amount depends on the specific vehicle make and model. For example, a 2006 Ford Fusion 3.0L V6 requires 6 quarts, while a 2001 Jaguar S-Type 3.0L V6 needs 6.5 quarts. Always check your vehicle's owner's manual for the precise capacity and oil viscosity requirements.
| Vehicle | Oil Capacity |
|---|---|
| 2012 Ford Escape 3.0L V6 | 6 quarts |
| 2006 Ford Fusion 3.0L V6 | 6 quarts |
| 2003 Ford Ranger 3.0L V6 | 4.5 quarts |
| 2001 Jaguar S-Type 3.0L V6 | 6.5 quarts |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_KtslaZSfHPaP9u8Pg-2gkQU_161';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
How many quarts of oil for a 3.5 l V6?
6 quarts
6 quarts (with filter). After refill check oil level.
How many quarts of oil does a 3.0 V6 Toyota take?
5 quarts
Pour 5 quarts of 10W-30 automobile oil into the engine. Use one hand to stabilize the funnel to help prevent spills.
