How much oil does a 2018 Toyota Tacoma 3.5 V6 take?
The 2018 Toyota Tacoma with the 3.5-liter V6 engine uses about 6.0 quarts (5.7 liters) of engine oil when performing an oil change with a new filter, typically with SAE 0W-20 synthetic oil.
This figure helps guide maintenance planning, ensuring you have the right amount of oil on hand and that you avoid overfilling. The following details summarize the official specification and practical tips for servicing this engine.
Official oil capacity and recommendations
Toyota documents provide a baseline capacity for routine oil changes that include a new filter. The figure below reflects the standard reference for the 2018 Tacoma’s 3.5L V6 when you replace the filter.
- Oil capacity (with filter): 6.0 quarts (5.7 liters)
After adding oil, verify the level with the dipstick and adjust as necessary. Note that capacity can vary slightly if you reuse an unusual filter or omit a filter during service. Always confirm the exact amount for your specific vehicle by checking the owner's manual or your dealership/service documentation.
Oil type and maintenance notes
For most 3.5L V6 Tacomas, use SAE 0W-20 full synthetic oil. Oil-change intervals are typically guided by Toyota's Maintenance Minder system, and actual intervals can vary based on driving conditions and climate. Always follow the maintenance minder recommendations and the owner's manual for the most accurate guidance.
Summary
The 2018 Toyota Tacoma 3.5 L V6 typically requires 6.0 quarts (5.7 liters) of engine oil when performing an oil change with a new filter, using 0W-20 synthetic oil. Always verify the exact figure in your owner's manual and monitor the oil level after the service to ensure proper fill.
How much oil does a 3.5 L V6 Toyota engine take?
6.1 quarts
3.5L V6 Engine: 6.1 quarts with filter. 2.5L Hybrid Engine: 4.5 quarts with filter.
What oil is recommended for a 2018 Toyota Tacoma?
So what is the recommended oil type for the Toyota Tacoma? Like many other Toyota vehicles, the Tacoma runs best on synthetic oil with a grade of SAE 0W-20 or SW 5W-20.
How much oil does a 2018 Toyota Tacoma 3.5 L V6 take?
The 2018 Toyota Tacoma 3.5L oil capacity is 6.1 quarts for models without the tow package and 6.2 quarts for models with the tow package, both with a new filter. The recommended oil is 0W-20 full synthetic oil.
- Without tow package: 6.1 quarts (or 5.8 liters)
- With tow package: 6.2 quarts (or 5.9 liters)
What kind of oil does a Toyota Tacoma 3.5 V6 take?
Toyota recommends using 0W-20 oil viscosity for the Tacoma.
