How much oil does a 2019 Lexus ES 300h take?
The 2019 Lexus ES 300h uses about 4.6 quarts (4.4 liters) of engine oil when performing a full change with the filter.
This article explains the official capacity, the recommended oil type, and practical tips for checking and maintaining oil levels in this hybrid sedan.
Official engine oil capacity
According to Lexus documentation for the ES 300h, the engine oil capacity is quoted as approximately 4.6 quarts (4.4 liters) when performing a complete oil change with a new filter. This figure covers drain-and-fill operations and assumes the use of the recommended filter.
- Engine oil capacity (with filter): about 4.6 quarts (4.4 liters)
- Recommended oil grade: SAE 0W-20 full synthetic
- Drain-and-fill versus total fill: the 4.6-quart spec accounts for a full change with filter
- Service interval for synthetic oil (normal driving): typically every 10,000 miles (16,000 km) or 12 months, whichever comes first
Note: Always verify the exact capacity in the owner's manual for your VIN, as markets and trim levels may vary slightly.
Choosing the right oil
Using the correct viscosity and quality oil is crucial for the ES 300h’s hybrid powertrain, which combines a Atkinson-cycle engine with an electric motor. Here are the essentials:
- Recommended oil: 0W-20 synthetic is standard for most climates
- Quality standard: Look for API Certification and ILSAC standard; Lexus-approved oils are also common
- Brand considerations: Many major brands offer compatible 0W-20 synthetic oils
In practice, drivers in moderate climates commonly use a 0W-20 full synthetic oil year-round to maintain optimal lubrication and fuel efficiency.
How to check and change oil
Follow these steps to safely check the oil level and perform a change on the ES 300h. The hybrid’s powertrain resembles conventional engines, with added care for the hybrid system.
- Prepare the vehicle on level ground; set parking brake and allow the engine to cool before draining oil.
- Place an oil drain pan under the engine and remove the drain plug; allow used oil to fully drain.
- Remove and replace the oil filter with a compatible filter intended for the ES 300h.
- Reinstall the drain plug, and pour in the recommended quantity of oil (about 4.6 quarts) of 0W-20 synthetic.
- Run the engine briefly, check for leaks, turn off, wait a few minutes, then check the dipstick and add oil to reach the correct level if needed.
Important: Proper oil disposal is required; recycle used oil at an authorized facility and keep maintenance records.
Why correct capacity matters
Maintaining the correct oil capacity ensures proper lubrication, optimal engine performance, and compliance with warranty terms. Underfilling can lead to increased wear; overfilling can cause foaming and potential damage to seals and components.
Summary
The 2019 Lexus ES 300h relies on approximately 4.6 quarts (4.4 liters) of engine oil per full change with a new filter, using 0W-20 synthetic oil. Always consult your owner's manual for the exact capacity and follow the recommended service intervals to keep the hybrid powertrain running smoothly and efficiently.
How many quarts of oil does a Lexus ES 300 take?
The 2023 Lexus ES 300h takes 5.4 quarts of oil.
How much oil does a 2019 ES 300h take?
The 2019 Lexus ES 300h has an oil capacity of approximately 4.8 quarts (4.5 liters) when the filter is changed. It requires full synthetic 0W-16 motor oil, though 0W-20 can be used temporarily if 0W-16 is not available, as long as it's replaced with 0W-16 at the next oil change.
- Oil Capacity: 4.8 quarts (4.5 liters) with filter change.
- Recommended Oil Type: Full synthetic 0W-16.
- Alternative Oil: 0W-20 can be used if 0W-16 is unavailable, but you must switch back to 0W-16 at the next oil change.
- Important Note: Always check the dipstick after filling and adjust the level as needed.
What oil does a Lexus ES300h take?
The recommended oil for a Lexus ES300h is 0W-16 full synthetic oil. If 0W-16 is not available, you can temporarily use 0W-20 full synthetic oil, but it must be replaced with 0W-16 at the next service. The total oil capacity is approximately 4.8 quarts with a filter change.
Key details
- Recommended oil: 0W-16 full synthetic
- Alternate oil: 0W-20 full synthetic (for temporary use only)
- Oil capacity: 4.8 quarts (with filter)
Important considerations
- Always use full synthetic oil for this engine.
- If you use 0W-20, ensure you switch back to 0W-16 at your next oil change to maintain engine performance and longevity.
How many quarts of oil does a 3.0 V6 Toyota take?
5 quarts
Pour 5 quarts of 10W-30 automobile oil into the engine. Use one hand to stabilize the funnel to help prevent spills.
