How much oil does a 2.4 l Ford Transit take?
As a trusted auto service provider with years of experience in car maintenance and repair, I often get asked about the oil capacity of various vehicles. One common question is: "How much oil does a 2.4L Ford Transit take?" In this article, I’ll provide a detailed answer to help you maintain your Ford Transit properly and keep it running smoothly.
Understanding the Oil Capacity of a 2.4L Ford Transit
The 2.4L Ford Transit is a popular choice for both personal and commercial use due to its reliability and performance. To ensure optimal engine health, it’s crucial to use the correct amount of oil during an oil change. The oil capacity for a 2.4L Ford Transit is approximately 6.5 quarts (6.2 liters). This includes the oil required to fill the engine and the oil filter.
Why Is Using the Correct Oil Capacity Important?
Using the correct amount of oil is essential for the following reasons:
- Engine Protection: Proper oil levels ensure that all engine components are adequately lubricated, reducing wear and tear.
- Optimal Performance: The right oil capacity helps maintain engine efficiency and performance.
- Avoiding Damage: Overfilling or underfilling the oil can lead to engine damage, increased emissions, or even costly repairs.
Steps to Check and Refill Your Oil
If you’re performing an oil change or simply checking your oil levels, follow these steps:
- Park your Ford Transit on a level surface and turn off the engine. Allow it to cool for a few minutes.
- Locate the dipstick, pull it out, and wipe it clean with a cloth.
- Reinsert the dipstick fully, then pull it out again to check the oil level. The oil should be between the "Min" and "Max" marks.
- If the oil level is low, add oil in small increments, checking the dipstick frequently to avoid overfilling.
- Once the oil level is correct, securely replace the dipstick and close the oil cap.
Choosing the Right Oil for Your Ford Transit
In addition to using the correct amount of oil, it’s important to use the right type of oil. For the 2.4L Ford Transit, Ford typically recommends using 5W-30 synthetic motor oil. Always refer to your vehicle’s owner’s manual for specific recommendations.
Final Thoughts
Maintaining the correct oil level in your 2.4L Ford Transit is a simple yet vital part of vehicle maintenance. By ensuring you use approximately 6.5 quarts of the recommended oil, you can keep your engine running smoothly and extend its lifespan. If you’re unsure or need assistance, don’t hesitate to visit a trusted auto service provider like Kevin’s Autos for professional help.
Frequently Asked Questions
How long does a 2.4 L 4-cylinder engine last?
With proper oil changes and maintenance, a 2.4L TigerShark engine should last between 130,000 and 200,000 miles. However, the oil consumption issues and piston ring failures can severely limit the lifespan of these engines before they need significant repair or fail completely.
How much oil does a 2.5 L transit take?
5.7 qt
Capacities and Specifications - 2.5L
| Item | Capacity |
|---|---|
| Engine lubrication system - including the oil filter | 5.7 qt (5.4 L) |
| Engine lubrication system - excluding the oil filter | 5.4 qt (5.1 L) |
| Engine oil top-up - raise the level on the dipstick from minimum to maximum | 0.8 qt (0.75 L) |
| Automatic transmission fluid1 | 9.0 qt (8.5 L) |
What is the best oil for Ford Transit diesel?
Our top-rated products that suit FORD Transit Custom V362 Van (FY, FZ) 2.0 EcoBlue Diesel 170 hp best are:
- Engine oil CASTROL Magnatec, Stop-Start D 0W-30, 5l.
- Engine oil FUCHS TITAN, Supersyn F ECO-FE 0W-30, 5l.
- Engine oil MOTUL ECO-CLEAN 0W-30, 5l, Synthetic Oil.
What engine oil do I need for a Ford Transit 2.4 diesel?
Ford Transit oil change
| Engine Oil Type | SAE 5W/30 to Ford specification WSS-M2C913-C (preferred specification) |
|---|---|
| SAE 5W/30, 5W/40 or 10/W40 to specification ACEA A5/B5 (alternative specification)* | |
| Engine Oil Capacity (including oil filter) | 6.2 litres (2.2-litre engines) |
| 6.9 litres (2.4-litre engines) |
What engine is 2.4 Transit?
Transit 2.4 engine, diesel 2.4 TDCI, 2.4 TDDI, 90 hp, 115 hp, 125 hp, Ford Transit 2003 MK6. The range of Ford Transit engines increased by diesel engines with a capacity of 2.4 liters with the advent of MK6 model. Then Ford presented first time the 2.4 TD turbocharged unit with power ranging from 90 hp to 125 hp.
How much oil does a 2017 Ford Transit 2.5 take?
Capacity: 5.7 quarts (with filter). After refill check oil level.
How much engine oil does a Ford Transit take?
| Parameter | Diesel Engine | Petrol Engine |
|---|---|---|
| Filling Capacity (with filter change) | 4.5–6.5 litres | 4.5–6.5 litres |
| Oil Change Interval | 30,000 km or 2 years | 30,000 km or 2 years |
| Recommended Brands | Shell, Total, Valvoline | Castrol, Motul, Mobil1 |
| Biofuel Compatibility | Yes (up to B7) | No |
How much oil does a Ford Transit 2.4 take?
Capacities
| Variant | Item | Capacity in Litres (gallons) |
|---|---|---|
| 2.2L DuraTorq-TDCi, rear-wheel drive | Engine oil − with filter | 10.1 (2.2) |
| 2.2L DuraTorq-TDCi, rear-wheel drive | Engine oil − without filter | 9.7 (2.1) |
| 2.4L DuraTorq-TDCi | Engine oil − with filter | 8.8 (1.9) |
| 2.4L DuraTorq-TDCi | Engine oil − without filter | 8.4 (1.8) |
How much oil does a 2.4 L 4 cylinder take?
4.5 quarts
4.5 quarts (with filter). After refill check oil level.
Is 4 quarts of oil enough?
Typically, engines need five to eight quarts of oil.
