How much oil does a 3.5 l Ford Flex take?
The 3.5L Ford Flex takes 5.7 quarts (5.4 liters) of oil. This is the recommended oil capacity for the 3.5L V6 engine found in the Ford Flex crossover SUV.
Detailed Answer
The 3.5L Ford Flex is equipped with a 3.5-liter V6 engine that requires 5.7 quarts (5.4 liters) of engine oil. This is the standard oil capacity specified by Ford for this particular engine and vehicle model.
When performing an oil change on a 3.5L Ford Flex, it's important to use the recommended oil type and quantity to ensure proper lubrication and engine performance. The owner's manual for the Ford Flex will provide the specific oil requirements, including the recommended viscosity grade and whether conventional or synthetic oil is preferred.
Oil Change Procedure
- Locate the oil drain plug, usually located at the bottom of the oil pan
- Place a drain pan underneath to catch the used oil
- Unscrew the drain plug and allow the oil to fully drain out
- Once drained, replace the drain plug and tighten it securely
- Locate the oil filter, typically accessible from the top of the engine
- Use an oil filter wrench to remove the old filter and install a new one
- Unscrew the oil fill cap and pour in 5.7 quarts (5.4 liters) of the recommended oil
- Replace the oil fill cap and start the engine to circulate the new oil
- Check the oil level using the dipstick and add more oil if necessary
It's important to follow the manufacturer's recommendations for oil change intervals to ensure the longevity and proper operation of the 3.5L Ford Flex engine.
How much oil does a Ford Flex 3.5 take?
Capacity: 6 quarts (with filter).
How much oil does a 3.5 l V6 Ford Edge take?
6.0 qt
Capacities and Specifications - 3.5L
| Item | Capacity |
|---|---|
| Engine oil | 6.0 qt (5.7 L) |
| Engine coolant | 11.7 qt (11.1 L) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
| Rear differential (All Wheel Drive) fluid | 2.4 pt (1.15L) |
How much oil does a Ford 3.5 non turbo hold?
Capacities and Specifications - 3.5L Duratec
| Item | Capacity |
|---|---|
| Engine oil (with oil filter) | 6.0 qt (5.7 L) |
| Engine coolant (without trailer tow) | 13.1 qt (12.4 L) |
| Engine coolant (with trailer tow) | 13.4 qt (12.7 L) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
How many miles per gallon does a 2014 Ford Flex EcoBoost get?
Acceleration and Power
A six-speed automatic transmission is paired with both engines. According to the EPA, the base Flex achieves 18/25 mpg city/highway, while models with the turbocharged engine earn slightly lower ratings. The Flex's fuel economy is fairly good for the class.
How long will a Ford Flex engine last?
around 200,000 miles
You can expect a typical Ford Flex to last around 200,000 miles, typical for a car from Ford. Items like your driving habits, maintenance tactics, fluid changes, and other actions will help you make all the right decisions to increase the lifespan of your Ford Flex.
How many quarts of oil does a 3.5 L take?
6 quarts
Capacity: 6 quarts (with filter). After refill check oil level.
How much oil does a 3.5 L take?
Capacity: 6 quarts (with filter). After refill check oil level.
What kind of oil does a 2017 Ford Flex take?
FRAM – Full Synthetic High Mileage 5W-20 Motor Oil: 5 Quart (Part No. F923-5QT)
How much oil does a 2014 Ford Flex 3.5 take?
Oil Grade: SEO18
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 6 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
How many quarts does a Ford Flex hold?
It's in the owners manual. Non-EcoBoost uses 5W20 (EB uses 5W30 BTW), same capacity both engines, 5.2L or 5.5 quarts.
