How much oil does a 4.7 V8 Dodge Dakota take?
The 4.7L V8 engine in the Dodge Dakota typically requires 5 quarts of oil for an oil change. This is the standard oil capacity for this engine configuration.
Detailed Overview
The Dodge Dakota is a mid-size pickup truck that was produced by Dodge from 1987 to 2011. One of the engine options available for the Dakota was a 4.7-liter V8 engine. This V8 powerplant had a displacement of 287 cubic inches and produced between 230 to 260 horsepower, depending on the model year.
For routine oil changes on a 4.7L V8 Dodge Dakota, the recommended oil capacity is 5 quarts. This includes the oil filter, which holds approximately 1 quart of oil. So the total oil change volume for this engine is 5 quarts.
Oil Change Procedure
- Locate the oil drain plug, usually on the bottom of the oil pan, and drain the old oil.
- Replace the oil filter.
- Pour in 5 quarts of new, high-quality motor oil recommended by Dodge for the 4.7L V8 engine.
- Start the engine and check for any leaks.
- Allow the engine to run for a few minutes, then check the oil level and top up if necessary.
It's important to use the correct oil type and viscosity specified by Dodge for optimal engine performance and longevity. Consult your owner's manual or contact a Dodge dealer for the recommended oil specifications.
How much oil does a 4.7 L V8 take?
Capacity: 6 quarts (with filter). After refill check oil level.
How many quarts of oil does it take to fill up a V8?
6.5 to 7 quarts is fine.
What weight oil does a 2000 Dodge Dakota 4.7 take?
Oil Grade: API*
5W-30 (Below 38°C) - SAE 5W-30 is preferred.
How much oil does a 2005 Dodge 4.7 take?
6 quarts
Customer: how many quarts of oil are needed for a 2005 dodge ram 1500 slt with a 4.7 liter v8 sohc engine? Your vehicle requires 6 quarts or 5.7 liters of oil when changing the oil and filter. The recommended oil is 5w30.
What kind of oil does a 2000 Toyota Tundra 4.7 V8 take?
SAE 5W30 oil
2000-2009 Toyota Tundra 4.7L V8 models use ILSAC GF-5 SAE 5W30 oil type.
What kind of oil does a 2002 Dodge Dakota 4.7 V8 take?
AMSOIL 5W-30 100% Synthetic High-Mileage Motor Oil.
How many quarts does a 4.7 Hemi take?
Capacity: 6.6 quarts Initial Fill.
How much horsepower does a Dodge 4.7 liter V8 have?
It originally produced 235 hp (175 kW) and 295 lb⋅ft (400 N⋅m) of torque. The 4.7 L V8 is available with four speed and five speed automatic transmissions and a 5 speed manual transmission.
How much oil does a 4.7 Dodge Dakota take?
Capacity: 6 quarts (with filter). After refill check oil level.
How many cubic inches is a 4.7 L v8 Dodge engine?
286.7 cu in
The displacement is 4.7 L; 286.7 cu in (4,698 cc) with a bore and a stroke of 3.66 in × 3.405 in (93.0 mm × 86.5 mm).
