How much oil does a Acura MDX 3.7 take?
The MDX with the 3.7-liter V6 typically requires about 5.5 quarts of engine oil (roughly 5.2 liters) when performing a full oil change with a new filter.
Understanding the 3.7L MDX oil capacity
The 3.7L V6 engine was used in MDX models from 2007 through 2013. Oil capacity figures can vary slightly by year and service data, so it’s important to confirm the exact specification for your vehicle in the owner’s manual or official service data. The capacity quoted here reflects a full change with a fresh filter.
Note: Always verify the correct amount for your specific model year. Some sources list small deviations (a few tenths of a quart) depending on production changes or filter type. If you’re unsure, start with 5.5 quarts, then check the level with the dipstick and top off as needed to reach the full mark.
Official capacity figures (typical reference for the 3.7L MDX):
- Oil capacity with filter: 5.5 quarts (approximately 5.2 liters)
- Additional notes: Some model-year data may show slight variations (up to about 0.2–0.5 quarts); always verify with your manual for your exact year
Conclusion: Plan for about 5.5 quarts of oil when changing the oil on a 3.7L MDX, and adjust based on your vehicle’s specific manual if needed.
How to fill and verify the proper oil level
Before you begin, gather the right tools and oil specification for your vehicle (check the owner’s manual for the correct grade and amount). Use a funnel to minimize spills and always confirm the level with the dipstick after the engine has cooled for a few minutes.
- Park on level ground and turn off the engine. If you’ve just driven the car, wait 5–10 minutes for the oil to settle before checking or adding oil.
- Remove the oil filler cap on top of the engine to allow air to escape as you add oil.
- Pour in oil in increments of about 1 quart (~0.95 L) and wait a moment for it to settle, then check the dipstick to see how close you are to the full mark.
- Continue adding small amounts and rechecking until the dipstick shows the oil level at the full line. Do not overfill.
- Replace the filler cap, start the engine, and let it run for a minute. Turn off and recheck the level once more after the engine has cooled, adding a stray amount if needed to reach the full line.
Conclusion: Following these steps helps ensure you achieve the correct oil level after a change, using the typical 5.5-quart capacity as a baseline for the 3.7L MDX.
Summary
For the Acura MDX equipped with the 3.7L V6 (years 2007–2013), the standard oil capacity for a full change with a new filter is about 5.5 quarts (roughly 5.2 liters). Always verify with your specific model year’s manual, as slight variations can occur. When in doubt, start with 5.5 quarts, and use the dipstick to top up to the correct full level after allowing the oil to settle.
How much oil does a 2007 Acura MDX 3.7 take?
4.5 quarts
2007 Acura MDX - Specifications
| POWERTRAIN | |
|---|---|
| Engine Type | 3.7 L 24-valve aluminum-alloy SOHC VTEC® V6 |
| Engine Oil | Change w/ Filter- 4.5 quarts/4.3 liters |
| Total - 5.3 quarts/5.0 liters | |
| FUEL ECONOMY |
Can I use 5w30 instead of 5w20 in my Acura?
Everywhere else in the world besides the US, depending on climate, Acura/Honda suggests different viscosities in our J32/J35 engines, ranging from 5w20-10w40. These engines were designed to run on 5w30. You aren't going to hurt anything. Especially if you live somewhere hot.
How much oil does a 3.7 L Acura MDX take?
4.5 quarts (with filter).
How many quarts of oil does a 3.7 L V6 take?
A 3.7L V6 engine typically requires 6 quarts of oil, including the oil filter. However, the exact amount can vary slightly depending on the vehicle, so it is always best to check your owner's manual for the most accurate information for your specific make and model.
- Capacity: Most 3.7L V6 engines, such as those found in many Ford and Jeep models, require about 6 quarts of oil when replacing the filter.
- Verification: After refilling, always check the dipstick to ensure the oil level is correct. Do not overfill.
- Owner's Manual: To confirm the exact oil capacity and the correct oil viscosity for your specific vehicle, consult your owner's manual.
